An especially attractive dull matt surface finish
An especially attractive dull matt surface finish
Hesse PU SOFT-GRIP DU 44130 is a clear two-component PU Top coat that provides a pleasantly soft and dull matt surface feel. Many effect ideas in line with the general trend can be produced on transparent Hesse PU Basecoats or pastel colour tones in the Hesse colour lacquer series DB 555-(colour tone) / DB 45245-(colour tone).
How to – SOFT-GRIP Effect
- Foil-covered MDF sideboard fronts in a signal gray colour tone with the dull matt SOFT-GRIP Effect
- Edge sanding: 150 - 180 grit (dust removal)
- Foil sanding: 320 - 400 grit (dust removal)
- Basecoat: Apply 1 x 150 - 180 g/m² Hesse EASY-FILL DP 4788-9343, mixing ratio (by volume) 100 : 15 with PU Hardener DR 4096-0002, adding 10 % Thinner DV 4900 to the lacquer/ hardener mixture
- Drying: 5 h / 20 °C, preferably 16 h / 20 °C
- Filler sanding: 320 - 400 grit (dust removal)
- Colour lacquer coating: 1 x 120 - 140 g/m² Hesse FANTASTIC-COLOR DB 48885-7004, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071, adding 15 - 25 % Thinner DV 4900 to the lacquer/ hardener mixture
- Allow to dry for 2 h / 20 °C
- Top coat: 1 x 130 - 160 g/m² Hesse PU SOFT-GRIP DU 44130, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4078, adding 10 - 15 % Thinner DV 4900 to the lacquer/ hardener mixture
- Drying: 16 h / 20 C°
What makes our SOFT-GRIP Effect so special?
What makes our SOFT-GRIP Effect so special?
Here’s a detailed view of the finished surface.
Products required
General information:PU lacquers should not be used or dried at material or room temperatures below 18°C and 40 % RH. Ideal values: 20 - 25 °C, 50 - 65 % RH. Deviations may result in drying or respectively hardening defects. Please sand back PU lacquered surfaces before applying fresh lacquer, and coat the sanded surfaces as soon as possible to avoid adhesion problems. Old lacquer/ hardener mixtures can affect your surface quality (adhesion/ resistance properties). Freshly bleached wood must be intermediately dried for at least 48 h / 20 °C prior to coating with suitable PU lacquers. Final hardness of the coating is achieved after one week in correct storage conditions (at least 20 °C room temperature). Please apply a test coating under real conditions!
Contact partner
