What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/EN

Cherry tree antique effect

An effect simulating traces of use

Cherry tree wood surfaces with an antique effect simulating traces of use

Our Cherry tree antique effect involves a combination of different surface products. The use of Patina and Wiping stain with a special sanding technique enables this effect to simulate a piece of furniture that has aged over centuries. This special character is intensified by the simulated traces of use and wormholes.

Fields of application : Living room furniture, object furnishings in cherry tree wood, especially furniture made from solid wood.

How to – Cherry tree antique

Solid cherry dining table

  • Solid cherry substrate material
  • Use nails, chisels, etc. to introduce traces of use, wormholes, etc.
  • Wood sanding 150 - 180 grit • 1 x staining without wiping using Precious wood stain BE 63-21997
  • Dry for at least 3 h / 20 °C room temperature
  • Apply 2 x MEGA-PUR Basecoat DG 417 / DG 4717-0005 with intermediate sanding between coats, mixing ratio 5 : 1 with Hardener DR 4070 + at least 10 % Thinner DV 4900
  • Dry for at least 16 h / 20 °C room temperature
  • Spray on 1 x HYDRO Wiping stain TW 4130-8022 and, once dried, use steel wool or fine sanding (for instance a sanding sponge) to remove it completely from the surface so that the HYDRO Wiping stain only remains in the small traces of use and the wood pores. Any HYDRO Wiping stain not removed from the surface could result in adhesion issues!  
  • Allow to dry for at least 2 h / 20 °C room temperature
  • Effect sanding at 220 grit (optionally also coarser) along the texture
  • Finish with 1 x UNA-PUR DE 559 / DE 42599 glossy, mixing ratio 10 : 1 with hardener DR 4070 and drying for at least 16 h / 20 °C room temperature

Technical Information Antique cherry tree wood

TO THE TECHNICAL INFO

Products required

Precious wood stain
such as BE 63-21997
To the product
MEGA-PU Basecoat
DG 417
To the product
Wiping stain
such as TD 4220-8022
To the product
UNA-PUR
DE 559 glossy
To the product
Interested in a sample?
Obtain additional inspiration

You’ll find more effects in our Sample shop. Make your choice and order your desired sample free of charge.

Link to the Sample shop
Processing and safety information
Please observe the latest technical information and the material safety data sheets for the stated individual products. Please conduct a test coating under real conditions. Please follow the precise specifications for addition of hardeners and thinners and the drying times included in the effect creation information set out below. Ensure careful stirring or respectively mixing in of all necessary components.
 
Note
This information is purely advisory and is based on the best knowledge available after careful research in line with current state of the art technology. It is not legally binding. We also refer you to our Terms and Conditions. The material safety data sheet as per regulation (EC) No. 1907/2006 is available.

Contact partner

Porträt von Waldemar Harnos
Waldemar
Harnos
DE | EN
Support Technical Hotline