What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/EN

Weathered oak

Elegant oak should sometimes look used.

Versatile application options

Description/ features: Surface finish in weathered oak effect.

Fields of application: Interior fittings and furniture

How to – Weathered oak

  • Substrate material: oak in solid wood or slip-matched veneer with a veneer thickness of at least 0.7 mm, preferably 1 mm  
  • deeply textured using an Andalon brush  
  • Spray 2 x nicely moist coats of antique pre-stain WAV58-20506, without wiping  
  • Dry for at least 3 h / 20 °C room temperature  
  • Sand using a 150 grit sanding sponge to produce an effect  
  • Spray on 1 x Antique stain WA 58-20504 nicely moist, with wiping  
  • Dry for at least 3 h / 20 °C room temperature  
  • Apply 2 x  FANTASTIC-NATURA DA 48660 with intermediate sanding at 320 grit, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 
  • Dry for at least 16 h / 20 °C room temperature  

Technical information weathered oak

TO THE TECHNICAL INFO

Products required

Antique pre-stain
WAV 58-20500
Link to the product
Antique stain
WA 58-20504 light
Link to the product
Antique stain
WA 58-20506 dark
Link to the product
FANTASTIC-NATURA
DA 48660
Link to the product
Processing and safety information

Please observe the latest technical information and the material safety data sheets for the stated individual products.

Particular instructions

• In addition to selection and texturing of the bare wood, the application quantity and sanding of the stain also have a crucial influence on the effect produced.
• PU lacquers should not be used or dried at material or room temperatures below 18°C.
• Please sand back the PU lacquered surfaces before applying fresh lacquer and apply coatings to the sanded surfaces as soon as possible to avoid adhesion problems. 
• Final hardness of the coating is achieved after one week in correct storage conditions (at least 20 °C room temperature).
• Please conduct a test coating under real conditions.

Please follow the precise specifications for addition of hardeners and thinners.

Note

This information is purely advisory and is based on the best knowledge available after careful research in line with current state of the art technology. It is not legally binding. We also refer you to our Terms and Conditions. The material safety data sheet according to regulation (EC) No. 1907/2006 is available on request.

Contact partner

Porträt von Waldemar Harnos
Waldemar
Harnos
DE | EN
Support Technical Hotline