2C HYDRO Filler HDP 5640-9343
The 2K HYDRO Pigment filler HDP 5640-9343 is an IMO-certified filling primer with a broad field of application and is especially suitable for surfaces subject to heavy use, such as those in wet rooms. Its filling power and thixotropy make this HYDRO-acrylate product especially easy to use. The 2K HYDRO Pigment filler can be machine sanded and can subsequently be coated with all suitable Hesse lacquer systems. The product is certified as flame retardant to DIN EN 13501-1.
Artikel anfragen- Good body
- Thixotropic
- IMO-approved
- flame retardant according to EN 13501-1
Processing
Airless
Airmix
Compressed air spraying
Areas of application
For all interior designs, ideal for heavily used surfaces such as in kitchens, bathrooms and offices. And throughout residential settings, for instance for tables and sideboards; on a wide selection of wood species, on plywood, MDF, and on the edges of MDF. Also for stairs and handrails.
Page content
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 1,5 % |
|---|---|
| Appearance | opaque |
| Decopaint base | wb |
| Decopaint category | J |
| VOC EU % | 2,5 % |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 180 g/m² |
| Total quantity applied | 450 g/m² |
| Mixing ratio (volumetric) | 7 : 1 |
| Mixing ratio (gravimetric) | 100 : 11 |
Processing Instructions
| Potlife | 2 h / 20 °C |
|---|---|
| Drying | 5 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 120 - 400 |
| Intermediate sanding (grain size) | 280 - 400 |
| Yield per pass | 8 m²/l |
| Processing information | Add hardener slowly whilst stirring. Adjust the spray viscosity with water if required. Maximum additive volume 5 %. The hardener must always be added before thinning! Never store product mixed with hardener in closed containers. Subsequent coating: after sufficient drying and sanding back, if required, apply another coat of the same product or suitable HYDRO or PU products. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. When directly coating cleaned or sanded foils, please apply a test coat to check the bonding! |
| Special notes | This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 140 g/m².“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
2C HYDRO Filler HDP 5640-9343Your request for the series
2C HYDRO Filler HDP 5640-9343
