MULTI-PU DE 4532x(gloss level)-0004
DE 4532x(gloss level)-0004 is a light fast and well-bodied, transparent multi-coat lacquer. This product has high mechanical resistance and can therefore be used both for priming and as a top coat on all customary woods. It can also be applied on bleached surfaces . The product can also be employed for application using the roller / brush technique (thinned also as an edge sealer on MDF).
Enquire articlePage content
- very high mechanical resistance
- light fast
- can be used on bleached woods
- roller / brush application possible
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
- renewable resources 1%
- mineral resources 2%
- fossil resources 97%
Areas of application
DE 4532x(gloss level)-0004 can be used as a multi-coat lacquer for shopfitting and all interior fittings, including in kitchens and bathrooms as well as the fitting out of ship interiors.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Appearance | colourless |
|---|---|
| Number of layers (max) | 3 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 450 g/m² |
| Mixing ratio (volumetric) | 5 : 1 | Hardener: DR 4070 |
| Mixing ratio (gravimetric) | 100 : 21 | Hardener: DR 4070 |
Processing Instructions
| Potlife | 8 h / 20 °C |
|---|---|
| Drying | 5 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | 150 - 180 |
| Intermediate sanding (grain size) | 240 - 320 |
| Yield per pass | 6 - 9 m²/l |
| Processing information | One to three-coat application with 100 - 150 g/m² on suitable surfaces. The maximum total application amount is 450 g/m². When being used as a flame-retardant coating agent for seagoing vessels, the maximum total application amount is 200 g/m². |
| Special notes | Our dull matt formulation DE 45320-0004 is not to be used as a multicoat lacquer, but only as a single coating on top of matching base coats or on the next higher gloss level in the DE 4532x(gloss level)-0004 series!When being used as a flame-retardant coating agent for seagoing vessels as per SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120, this product may only be combined with other approved and technically suitable products.. For use as MDF edge isolation underneath coloured coating systems, prepare the mixture with 20 - 30% Thinner DV 4900 and apply an additional coat on the same day following prior sanding using 320 grit. This product can be used as a top coat on coloured polyurethane lacquers to improve metal marking resistance. “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
MULTI-PU DE 4532x(gloss level)-0004Your request for the series
MULTI-PU DE 4532x(gloss level)-0004
