PROTECT-OIL OE 5284x(gloss level)

Oil with a base consisting of linseed oil, as well as alkyd resin modified with natural oil, with added lead-free and cobalt-free siccatives, tough, abrasion resistant, diluted with isoparaffin, with good accentuation of the wood. Due to the optimum combination of raw materials, this product displays an outstanding light fastness for an oil system and only a minimal tendency towards yellowing at the absence of light. The open-pored and breathable surface is hard-wearing. Due to the innovative composition of its raw materials, this product does not have to be categorised according to the current version of the Globally Harmonized System of Classification and Labeling of Chemicals! For the care and maintenance of wooden flooring.

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

Universal oil for domestic use
For open-pore, breathable surfaces
Ready for use; Without lead and cobalt containing drying agents
does not have to be categorised according to the current version of the Globally Harmonized System of Classification and Labeling of Chemicals!
It has outstanding light fastness for an oil system!
just a slight tendency towards yellowing!

Processing

Compressed air spraying
Gauze pads / cloth
Wiping with a cloth

24%sustainable

renewable resources 20%
mineral resources 4%
fossil resources 76%

Areas of application

For parquet and surface treatment of wood in interior areas, such as living rooms, bedrooms and children's furniture, wall and ceiling panels. Chemical and mechanical resistance depends on the number of coats of oil that are applied.

Technical information

PDF

PROTECT-OIL OE 5284x(gloss level) 2 MB

Sustainability data sheet

PDF

PROTECT-OIL OE 5284x(gloss level) 689 KB

Certificates

PDF

Test report (German Industrial Standard EN 71-3) 1 MB

Technical Specifications

Proportion of renewable raw materials %	19,799 %
Appearance	colourless
Decopaint base	Lb
Decopaint category	F
VOC EU %	59,2 %
Number of layers (max)	2
Quantity per layers (min)	10 g/m²
Quantity per layers (max)	30 g/m²
Total quantity applied	60 g/m²

Processing Instructions

Drying	16 h / 20 °C
Due to hardening	7 d / 20 °C
Surface sanding (grain size)	120 - 240
Intermediate sanding (grain size)	320 - 400
Yield per pass	29 - 88 m²/l
Processing information	Manual filling:Apply thinly with a trowel or roll on, then immediately pad in or rub in. Large areas should be coated by two people.Manual application:Rub in using a sanding fleece and remove any excess with a cotton cloth, leaving no residue. In the furniture sector: Apply and rub in the product with a saturated fine sanding fleece. After a short exposure time, remove any excess with a cotton cloth. The surface should appear dry; if not, drying problems may occur.On parquet flooring: Apply the material with an appropriate trowel; after a short exposure time, work in evenly using the single-disc sander and white non-abrasive pad until the surface appears dry.
Special notes	The product is not suitable for woods susceptible to blue stain in damp rooms. The material properties were tested on commercially available woods such as oak, beech, etc. Please check suitability before using on other types of wood. In order to avoid white pores on dark, porous woods, we recommend using the glossy version of the oil, at least for the first coat. Hardening at 25 : 1 with OR 5180 increases the surface's mechanical and chemical resistance. The hardener additive accelerates complete drying. Pot life of the mixture at 1 h / 20 °C room temperature. Chemical and mechanical resistance depends on the number of coats of oil that are applied. The material dries with oxidation – please observe the general application instructions. Films or carpets must not be placed on the parquet flooring until it has completely hardened. Skin may form due to the high reactivity. Please remove before agitating. Subsequently the material should be filtered as a precaution. Stir carefully before use. Please observe the latest material safety data sheet!

Procedure example

Parquet: rustic oak planks, oiled matt

Wood sanding: 150 grit/screen with subsequent dust removal. Use a spatula to apply 1 x 15 - 20 g/m² Hesse PROTECT-OIL OE 52842. Allow a brief absorption period and then work it in using a single disc sander with white pad until the surface appears dry. Drying time at least 16 h / 20 °C room temperature and with adequate air exchange.

Use a spatula to apply 1 x 15 - 20 g/m² Hesse PROTECT-OIL OE 52842. Allow a brief absorption period and then use a single disc sander with white pad to work it in until the surface appears dry. Drying time: at least 16 h / 20 °C room temperature and with adequate air exchange. The parquet is then accessible with care. Full resilience is achieved after at least 7 d / 20 °C room temperature and with adequate air exchange.

Living room shelving in beech, oiled matt.

Bare wood sanding at grit 240 grit with subsequent dust removal. Use a fine sanding fleece to apply 1 x 10 - 20 g/m² Hesse PROTECT-OIL OE 52842 and rub it in evenly. Allow a brief absorption period and then use a soft cotton cloth to remove the excess until the entire surface appears uniformly dry. Drying time: at least 16 h / 20 °C room temperature and with adequate air exchange.

Use a fine sanding fleece to apply 1 x 10 - 20 g/m² Hesse PROTECT-OIL OE 52842 and rub it in evenly. Allow a brief absorption period and then use a soft cotton cloth to remove the excess until the entire surface appears uniformly dry. Drying time: at least 16 h / 20 °C room temperature and with adequate air exchange. Packable: after at least 24 h / 20 °C room temperature with sufficient air circulation. Full resilience is achieved after at least 7 d / 20 °C room temperature and with adequate air exchange.

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.