PU Top coat DU 44709-0002 anti-slip effect

Hesse PU Anti-slip effect DU 44709-0002 is a clear, two component PU finishing lacquer. This high gloss product can be used on matching transparent basecoats plus on Hesse coloured lacquers for slip resisting surfaces (but not on staircases or parquet flooring).

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

non-slip surface
It can be used on clear or coloured substrates

Processing

2C line
Compressed air spraying

2%sustainable

renewable resources 1%
mineral resources 1%
fossil resources 98%

Areas of application

After pre-priming the substrate, the Hesse anti-slip effect can for instance be used on coat hangers, the insides of drawers and for coating trays.

Technical information

PDF

PU Top coat DU 44709-0002 anti-slip effect 2 MB

Sustainability data sheet

PDF

PU Top coat DU 44709-0002 anti-slip effect 726 KB

Certificates

Technical Specifications

Proportion of renewable raw materials %	0,734 %
Appearance	colourless
VOC EU %	71,8 %
Number of layers (max)	1
Quantity per layers (min)	100 g/m²
Quantity per layers (max)	120 g/m²
Total quantity applied	120 g/m²
Mixing ratio (volumetric)	100 : 15 \| Hardener: DR 4078
Mixing ratio (gravimetric)	100 : 16 \| Hardener: DR 4078

Processing Instructions

Potlife	3 h / 20 °C
Drying	16 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	24 h / 20 °C
Surface sanding (grain size)	320 - 400
Intermediate sanding (grain size)	320 - 400
Yield per pass	8 - 9 m²/l
Special notes	Pre-priming is possible depending on the desired finish and substrate, for example with: DG 4741-0001, DB 45245-(colour tone), DB 45205-(colour tone).Only use paper as an intermediate layer when stacking the coated and dried surfaces. Lacquer to lacquer or lacquer to surface contact can result in adhesions if stored without an intermediate layer. The minimum and maximum application quantities are also to be observed in this context.

Procedure example

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.