UNA-ELITE HE 31-x(gloss level)
UNA-ELITE HE 31-x(gloss level) is a light fast, one-component multicoat lacquer for basecoats and top coating. It features very good protection against tread marks and common household chemicals. This tough-elastic product can be used on bleached woods and has good build qualities. Combination with brightening Primer HG 21 or accentuating Primer HG 22 is recommended for parquet and wooden floors that tend to be block-bonded. The special formulation of this lacquer also makes it suitable for coating wooden staircases to be creak-free.
Enquire articlePage content
- Light-fast
- Light inherent colour
- Good mechanical resistance
- Tough stair lacquer
Processing
Rolling
Spreading
- water 54%
- mineral resources 2%
- fossil resources 44%
Areas of application
For use in living areas, especially on parquet and wooden floors with an average to medium wear balance.
Technical information
Sustainability data sheet
Technical Specifications
| Appearance | colourless |
|---|---|
| Decopaint base | wb |
| Decopaint category | I |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 240 g/m² |
Processing Instructions
| Drying | 3 h / 20 °C |
|---|---|
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | 100 - 120 |
| Intermediate sanding (grain size) | 120 - 150 |
| Yield per pass | 9 - 10 m²/l |
| Processing information | The floor must first be sanded back to the bare wood and be dry and free from oil, grease, wax, silicones and sanding dust. Renovations/repairs on already sealed surfaces: Seal a sample section and check whether the existing substrate could be sealed using UNA-ELITE. After sufficient drying, test the bond of the overall structure! Shake the lacquer well! Press the insert sieve into the pouring hole, fill the lacquer into a suitable paint kettle and work from that! Do not use a mechanical mixer as there is a risk of foam or bubble formation! |
| Special notes | Critical substrates such as wood block, on-edge lamellar parquet, floor boards, parquet flooring on underfloor heating, etc. require proper pre-treatment with HG 22 to minimise the risk of lateral bonding. To avoid the possibility of staining, please only renovate parquet flooring, which was previously treated with solvent-based systems, with solvent-based systems again! Clean work equipment with water. Dried lacquer residue can be removed with Hesse CLEANING-AGENT DV 9. Films or carpets must not be placed on the parquet flooring until it has completely hardened. Shake well before use! Spraying: possible; however the addition of water is required. Personal protective equipment and adherence to the legal guidelines are necessary for spray application! |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
UNA-ELITE HE 31-x(gloss level)Your request for the series
UNA-ELITE HE 31-x(gloss level)
