ordered under product number XFF 2050 . The Sikkens colour chart The Sikkens 5051 Color Concept contains over 2,000 colour tones. It can be ordered under product number XFF . The RAL colour fan deck Our RAL [...] don’t match, even though they were ordered in the same colour tone. Or a lacquered part is not a 100 % match with the selected swatch on the colour card. This image demonstrates these effects. It involved [...] on the RAL K7 colour fan. It contains 215 colour tones. It can be ordered under product number XRF 3 .
Vietnam Wallis & Futuna Western Sahara Yemen Zambia Zimbabwe E-mail * Callback Please call me back Please call me back Phone number Your message Message * Please accept the privacy policy * Send * = required [...] Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail Contact details Salutation * Please choose Mrs Mr Title Firstname * Lastname * Company Country selection Please select Afghanistan [...] Spain Sri Lanka St. Barthélemy St. Helena St. Kitts & Nevis St. Lucia St. Martin St. Pierre & Miquelon St. Vincent & Grenadines Sudan Suriname Svalbard & Jan Mayen Sweden Switzerland Syria Taiwan Tajikistan
Vietnam Wallis & Futuna Western Sahara Yemen Zambia Zimbabwe E-mail * Callback Please call me back Please call me back Phone number Your message Message * Please accept the privacy policy * Send * = required [...] Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail Contact details Salutation * Please choose Mrs Mr Title Firstname * Lastname * Company Country selection Please select Afghanistan [...] Spain Sri Lanka St. Barthélemy St. Helena St. Kitts & Nevis St. Lucia St. Martin St. Pierre & Miquelon St. Vincent & Grenadines Sudan Suriname Svalbard & Jan Mayen Sweden Switzerland Syria Taiwan Tajikistan
DP 491-9343 or DP 4791-9343. Allow to dry for at least 3 h / 20 °C Then prime/prepare the substrate by spraying 1 x 180 to 200 g/m². (Caution: you will need large spray nozzles). To do this you need to [...] mixing ratio (gravimetric) 10 : 4 with commercially available cement. You then need to blend this mixture uniformly. Finally add the hardener to this filler/cement mixture, mixing ratio (by volume) 4 : 1 [...] Hardener DR 405 or respectively Hardener DR 4058. As required, and depending on the part, you can add 10 - 15 % Thinner DV 490 or respectively DV 4900 to the filler/cement/hardener mixture. After a brief period
Use stains or oils to add colour to wood Traditional stains Rustic stains Parquet stains Clear and coloured oils Slip cases for stain cards General technical descriptions Colour tone charts Use
The material safety data sheet as per regulation (EC) No. 1907/2006 is available. Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail [...] Versatile application options How to – Metallic stain effect What distinguishes this Metallic effect? Technical Information Metallic stain Products required Please note Contact partner Versatile application [...] effect is achieved using a hard sanding block Use Scotch-Brite™ hand pads to achieve this effect A “vein of gold” is drawn in with a pipette and the edges are slightly sanded using a sanding sponge. This
newsletter Category * Please choose Industry Craft E-mail * Please accept the privacy policy * Send * = required field Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send [...] Send E-Mail Dirk Reckert DE | EN Sales Assistant CET +492381 963 192 Send E-Mail
interior fittings How to – HYDRO Ornamental effect Sand the selected substrate material well (such as FPY or MDF priming foil, or melamine resin foil). We recommend sanding with 150 - 240 grit. Depending on [...] at 20 °C room temperature. Then sand with 280 - 400 grit directly before further coating. Next apply HYDRO COOL-COLOR HB 65285-(colour tone), adding 25 - 30 % of HYDRO Ornamental additive HZ 78 depending [...] mixer; therefore set it to slow (exception: see under hints and tips)! Apply 120 - 150 g/m 2 of this prepared colour lacquer mixture to the substrate material using an (over) pressure cup gun. Subject to
application and finishing techniques. This lacquer system has a particularly high metal content of up to 80 %, which means that the coated surface consists of almost pure metal. Our PU DECORATIVE-METAL product [...] Rust effect additionally finished using Cellulose lacquer. Stippled Rust effect Rust effect ZD 2690 + Effect agent rolled or stippled using a brush. Top coated stippled Rust effect PU-DECORATIVE-METAL Iron [...] form in our brochure. Read more Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
How to – Sanded metallic Substrate material: milled, foiled chipboard or MDF board, treated with filler and milled Prime with 1 x 150 - 200 g/m² PU Isolating filler DP 491-9343, mixing ratio (by volume) [...] 10% Thinner DV 490 Allow to dry for at least 16 h / 20 °C Sand in one direction using 80 - 180 grit according to the effect desired Finish with 1 x 80 - 120 g/m² PU Sanded Metallic DB 46777-M0790 silver [...] along the sanding direction, mixing ratio 10 : 1 with PU Hardener DR 4070 and as necessary add 5 - 10 % Thinner DV 490 Optionally finish with either UNA-PUR DE 559 glossy or DE 554 semi-matt after a maximum
sample free of charge. To the shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
fittings. How to – Spatter effect Ensure that the desired substrate material (such as FPY, MDF with priming foil or melamine resin foil) is well sanded. We recommend sanding with 150 - 240 grit. Depending [...] tone) in the desired colour tone for the substrate and thinned with 20 % water (if necessary with added Hesse Optimizer HZ 70) at 120 - 150 g/m² to create a colouring coat. The type of surface achieved is [...] left to dry overnight (around 16 h) preferably 24 h / 20 °C room temperature. Further impact options are offered by the way the gun is directed during spatter effect application (speed and distance from the
wood stain. Allow to dry for at least 4 h / 20 °C Apply 1 x 100 - 120 g/m² Hesse UNA-COLOR DB 45245-9010, mixing ratio (by volume) 10 : 1 with DR 4070, add 10 - 15 % Thinner DV 4900 in relation to the lacquer/ [...] lacquer/ hardener mixture. Allow to dry for at least 4 h / 20 °C, preferably overnight. Use an eccentric sander (220 - 320 grit) to sand the surface for effect so that the wood stain is partially but uniformly [...] You can find a video on product application via our website, www.hesse-lignal.de at Service / Media & Downloads / Videos. Please observe the latest technical information and the material safety data sheets
coarse grit. How to – Markotex effect PU-based application Substrate: textured softwood Apply 80 - 100 g/m² of Basecoat UNA-PUR DE 552, mixing ratio 10 : 1 with DR 4070 + 10 - 20 % Thinner DV 490 Allow [...] Allow to dry for 1 - 3 h Use a sponge for intermediate sanding Prime with 80 - 100 g/m² of PU Glaze lacquer DB 1554-0614, mixing ratio 10 : 1 with DR 4070 + 10 % Thinner DV 490 Allow to dry for at least 16 [...] to apply 1 x Wiping paste TW 130-9343 Allow to dry for 2 - 3 h Use a hard block with 120 - 150 grit sanding to produce the effect Finish with 80 - 100 g/m² of PU Glaze lacquer DB 1554-0614, mixing ratio
g at 120 - 150 grit Apply 1 x 100 - 150 g/m² UNA-COLOR DB 45245-(colour tone), mixing ratio 10: 1 with PU Hardener DR 4070 and diluted with 20 - 30 % PU Thinner DV 4900 Allow to dry for 2 h / 20 °C • Smoothing [...] Smoothing (320 grit) Apply 1 x 100 - 150 g/m² UNA-Color DB 45245-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 20 - 30% PU Thinner DV 4900 Allow to dry for at least 16 h / 20 °C [...] Finish with 1 x 70 - 100 g/m² PU Metallic Top coat DU 45457-99060, mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 10 % PU Thinner DV 4900 Allow to dry for at least 16 h / 20 °C Technical
for at least 3 h / 20 °C room temperature Sand using a 150 grit sanding sponge to produce an effect Spray on 1 x Antique stain WA 58-20504 nicely moist, with wiping Dry for at least 3 h / 20 °C room temperature [...] ATURA DA 48660 with intermediate sanding at 320 grit, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Dry for at least 16 h / 20 °C room temperature Technical information weathered oak TO THE TECHNICAL [...] material safety data sheet according to regulation (EC) No. 1907/2006 is available on request. Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
effect. Intermediate drying: 3 h / 20 °C Prime with 1 x 100 – 120 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Intermediate drying 2 h / 20 °C Light smoothing with a [...] Intermediate drying: 1 h / 20 °C Add a patina using antique stain WA 58-24510. Then accentuate the growth rings as flatly as possible using a cup gun with a small nozzle (1.2 mm) and reduced material flow [...] a sanding sponge Coat with 1 x 100 – 120 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Technical information weathered softwood TO THE TECHNICAL INFO Products required
at least 3 h / 20 °C room temperature Apply 2 x FANTASTIC-NATURA DA 48660 with intermediate sanding at 320 grit, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Dry for at least 16 h / 20 °C room [...] material safety data sheet according to regulation (EC) No. 1907/2006 is available on request. Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail [...] Versatile application options How to – Darkly weathered pine Technical information weathered pine Products required Note Contact partner Versatile application options Versatile application options Description/
charge. Link to the Sample shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
and coatings regulation - ChemVOCFarbV (German ordinance on solvent-based paints and varnishes) - according to the national implementation of 2004/42/EG ("Decopaint Directive "). PAH content according to [...] with ISO 16000 (Belgian VOC Regulation) DIN 68861-Part 7C (Behaviour with regard to dry heat) and DIN 68861-Part 8B (Behaviour with regard to damp heat) AMK-MB 005: Kitchen furniture – Humidity and climate [...] ISO 1518-1:2019 DIN 68861-Part 1 (finishes; behaviour under abrasion conditions) DIN 68861-Part 2 (finishes; behaviour under abrasion conditions) DIN 68861-Part 4 (finishes; Behaviour under scratch conditions)
technician "There are lots of people who work here and each of them has their own quite personal health history, even including handicaps." Gabriele Schangin & Steffen Martin Coating lab assistants "Made in Germany [...] Process innovation team "Our working from home arrangements give me great flexibility. My sons are really happy on the occasions when I can pick them up from school." Tim Lohrsträter & Patrick Heitkötter A [...] Application technology "Working with us is fun." Seher Dagci Logistics team member "Hesse offers us an extensive healthcare programme. Our company COVID-19 vaccination meant that my colleagues and I received
fittings. How to – Metallic finish Substrate material: Foil-coated MDF Edge and profile sanding: 150 - 180 grit (dust removal) Foil sanding: 320 - 400 grit (dust removal) Apply 150 - 300 g/m² Hesse PU [...] ratio (by volume) 4 : 1 with PU Hardener DR 4058 + 1 - 2 % Hesse PU Thixpaste ZD 3596 and 10 % DV 4991 in relation to the lacquer/ hardener mixture. Please mix all components in carefully. Drying: 3 - 5 min [...] Hardener DR 4070, adding 30 - 40 % Thinner DV 4900 to the lacquer/ hardener mixture Drying: 4 h / 20 °C PU Metallic effect sanding: 600 grit by hand (dust removal) Apply 130 - 160 g/m² Hesse UNA-PUR DE
interior fittings. How to – Desert look Substrate material: Foil-coated MDF Edge and profile sanding: 150 - 180 grit (dust removal) Foil sanding: 320 - 400 grit (dust removal) Apply 150 - 180 g/m² Hesse EASY-FILL [...] ratio (by volume) 100 : 15 with PU Hardener DR 4096-0002, adding 10 % Thinner DV 4900 to the lacquer/ hardener mixture Drying: 5 h / 20 °C, preferably 16 h / 20 °C Filler sanding: 320 - 400 grit (dust removal) [...] Apply 120 - 150 g/m² Hesse PU Desert look DB 46031-8001, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070, adding 10 - 15 % Thinner DV 4900 to the lacquer/ hardener mixture Drying: 5 min / 20 °C Apply
browser to understand. Current highlights Concrete Effect Cool, urban or rustic – the concrete look in an industrial design "rocks" any environment. A combination with white, black or bare wood always presents [...] partner Only genuine samples can be convincing. Only genuine samples can be convincing. Be inspired – surfaces you can touch to help with the decision on your material. Are you looking for inspiring ideas [...] years of enjoyment, even with daily use. Order your sample PERFECT-COLOR The alternative to solvent -based colour lacquer systems. Simple processing with exceptional levelling properties. Its rapid drying