coarse grit. How to – Markotex effect PU-based application Substrate: textured softwood Apply 80 - 100 g/m² of Basecoat UNA-PUR DE 552, mixing ratio 10 : 1 with DR 4070 + 10 - 20 % Thinner DV 490 Allow [...] Allow to dry for 1 - 3 h Use a sponge for intermediate sanding Prime with 80 - 100 g/m² of PU Glaze lacquer DB 1554-0614, mixing ratio 10 : 1 with DR 4070 + 10 % Thinner DV 490 Allow to dry for at least 16 [...] to apply 1 x Wiping paste TW 130-9343 Allow to dry for 2 - 3 h Use a hard block with 120 - 150 grit sanding to produce the effect Finish with 80 - 100 g/m² of PU Glaze lacquer DB 1554-0614, mixing ratio
g at 120 - 150 grit Apply 1 x 100 - 150 g/m² UNA-COLOR DB 45245-(colour tone), mixing ratio 10: 1 with PU Hardener DR 4070 and diluted with 20 - 30 % PU Thinner DV 4900 Allow to dry for 2 h / 20 °C • Smoothing [...] Smoothing (320 grit) Apply 1 x 100 - 150 g/m² UNA-Color DB 45245-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 20 - 30% PU Thinner DV 4900 Allow to dry for at least 16 h / 20 °C [...] Finish with 1 x 70 - 100 g/m² PU Metallic Top coat DU 45457-99060, mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 10 % PU Thinner DV 4900 Allow to dry for at least 16 h / 20 °C Technical
for at least 3 h / 20 °C room temperature Sand using a 150 grit sanding sponge to produce an effect Spray on 1 x Antique stain WA 58-20504 nicely moist, with wiping Dry for at least 3 h / 20 °C room temperature [...] ATURA DA 48660 with intermediate sanding at 320 grit, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Dry for at least 16 h / 20 °C room temperature Technical information weathered oak TO THE TECHNICAL [...] material safety data sheet according to regulation (EC) No. 1907/2006 is available on request. Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
effect. Intermediate drying: 3 h / 20 °C Prime with 1 x 100 – 120 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Intermediate drying 2 h / 20 °C Light smoothing with a [...] Intermediate drying: 1 h / 20 °C Add a patina using antique stain WA 58-24510. Then accentuate the growth rings as flatly as possible using a cup gun with a small nozzle (1.2 mm) and reduced material flow [...] a sanding sponge Coat with 1 x 100 – 120 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Technical information weathered softwood TO THE TECHNICAL INFO Products required
at least 3 h / 20 °C room temperature Apply 2 x FANTASTIC-NATURA DA 48660 with intermediate sanding at 320 grit, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Dry for at least 16 h / 20 °C room [...] material safety data sheet according to regulation (EC) No. 1907/2006 is available on request. Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail [...] Versatile application options How to – Darkly weathered pine Technical information weathered pine Products required Note Contact partner Versatile application options Versatile application options Description/
charge. Link to the Sample shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
and coatings regulation - ChemVOCFarbV (German ordinance on solvent-based paints and varnishes) - according to the national implementation of 2004/42/EG ("Decopaint Directive "). PAH content according to [...] with ISO 16000 (Belgian VOC Regulation) DIN 68861-Part 7C (Behaviour with regard to dry heat) and DIN 68861-Part 8B (Behaviour with regard to damp heat) AMK-MB 005: Kitchen furniture – Humidity and climate [...] ISO 1518-1:2019 DIN 68861-Part 1 (finishes; behaviour under abrasion conditions) DIN 68861-Part 2 (finishes; behaviour under abrasion conditions) DIN 68861-Part 4 (finishes; Behaviour under scratch conditions)
technician "There are lots of people who work here and each of them has their own quite personal health history, even including handicaps." Gabriele Schangin & Steffen Martin Coating lab assistants "Made in Germany [...] Process innovation team "Our working from home arrangements give me great flexibility. My sons are really happy on the occasions when I can pick them up from school." Tim Lohrsträter & Patrick Heitkötter A [...] Application technology "Working with us is fun." Seher Dagci Logistics team member "Hesse offers us an extensive healthcare programme. Our company COVID-19 vaccination meant that my colleagues and I received
fittings. How to – Metallic finish Substrate material: Foil-coated MDF Edge and profile sanding: 150 - 180 grit (dust removal) Foil sanding: 320 - 400 grit (dust removal) Apply 150 - 300 g/m² Hesse PU [...] ratio (by volume) 4 : 1 with PU Hardener DR 4058 + 1 - 2 % Hesse PU Thixpaste ZD 3596 and 10 % DV 4991 in relation to the lacquer/ hardener mixture. Please mix all components in carefully. Drying: 3 - 5 min [...] Hardener DR 4070, adding 30 - 40 % Thinner DV 4900 to the lacquer/ hardener mixture Drying: 4 h / 20 °C PU Metallic effect sanding: 600 grit by hand (dust removal) Apply 130 - 160 g/m² Hesse UNA-PUR DE
interior fittings. How to – Desert look Substrate material: Foil-coated MDF Edge and profile sanding: 150 - 180 grit (dust removal) Foil sanding: 320 - 400 grit (dust removal) Apply 150 - 180 g/m² Hesse EASY-FILL [...] ratio (by volume) 100 : 15 with PU Hardener DR 4096-0002, adding 10 % Thinner DV 4900 to the lacquer/ hardener mixture Drying: 5 h / 20 °C, preferably 16 h / 20 °C Filler sanding: 320 - 400 grit (dust removal) [...] Apply 120 - 150 g/m² Hesse PU Desert look DB 46031-8001, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070, adding 10 - 15 % Thinner DV 4900 to the lacquer/ hardener mixture Drying: 5 min / 20 °C Apply
browser to understand. Current highlights Concrete Effect Cool, urban or rustic – the concrete look in an industrial design "rocks" any environment. A combination with white, black or bare wood always presents [...] partner Only genuine samples can be convincing. Only genuine samples can be convincing. Be inspired – surfaces you can touch to help with the decision on your material. Are you looking for inspiring ideas [...] years of enjoyment, even with daily use. Order your sample PERFECT-COLOR The alternative to solvent -based colour lacquer systems. Simple processing with exceptional levelling properties. Its rapid drying
sample free of charge. link to shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
Make navigation easier for yourself Do you work as an architect/ planner ? Are you at home in a crafts trade or do you come from an industrial environment ? This is how you can quickly find all the co
491-9343, mixing ratio (by volume) 4 : 1 with PU Hardener DR 405 and diluted with 10 % PU Thinner DV 490 Allow to dry for at least 16 h / 20 °C Sand at 280 - 320 grit Apply 1 x 100 - 150g/m² UNA-COLOR DB [...] lacquer Basecoat DG 4744 (coating process in reverse order). How to – Raindrop effect Ensure that priming foil, laminated chipboard or MDF surfaces are well sanded Prime with 1 x 150 - 200 g/m² PU Isolating [...] at least 16 h / 20 °C The best depth effect is achieved by finishing with Brillant lacquer! Apply 1 x 100 - 120 g/m² each of DU 45229 PU Acrylic brilliant lacquer, for example, leaving 10 - 60 minutes between
colours are used. How to – Marble effect Step 1: Sand down priming foil, laminated chipboard or MDF surfaces well Prime with one coat of 150 - 200 g/m² FANTASTIC-FILL mixing ratio (by volume) 10 : 1 with PU [...] PU Hardener DR 4071 thinned with 15 % PU Thinner DV 4900 Dry for at least 16 hours at 20 °C Sand with 280 - 320 grain Apply one or two coats of 100 - 150 g/m² UNA-COLOR DB 45245-(colour tone) in the base [...] colour tone mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070 thinned with 10 % PU Thinner DV 4900 Dry for at least 16 hours at 20 °C Sand until slightly smooth (grain 400) Step 2: Apply UNA-COLOR DB
for at least 3 h / 20 °C room temperature Apply 2 x MEGA-PUR Basecoat DG 417 / DG 4717-0005 with intermediate sanding between coats, mixing ratio 5 : 1 with Hardener DR 4070 + at least 10 % Thinner DV 4900 [...] issues! Allow to dry for at least 2 h / 20 °C room temperature Effect sanding at 220 grit (optionally also coarser) along the texture Finish with 1 x UNA-PUR DE 559 / DE 42599 glossy, mixing ratio 10 : 1 [...] solid wood. How to – Cherry tree antique Solid cherry dining table Solid cherry substrate material Use nails, chisels, etc. to introduce traces of use, wormholes, etc. Wood sanding 150 - 180 grit • 1 x staining
Drying: 5 h / 20 °C, preferably 16 h / 20 °C Filler sanding: 320 - 400 grit (dust removal) Colour lacquer coating: 1 x 120 - 140 g/m² Hesse FANTASTIC-COLOR DB 48885-7004, mixing ratio (by volume) 10 : [...] Foil sanding: 320 - 400 grit (dust removal) Basecoat: Apply 1 x 150 - 180 g/m² Hesse EASY-FILL DP 4788-9343, mixing ratio (by volume) 100 : 15 with PU Hardener DR 4096-0002, adding 10 % Thinner DV 4900 to [...] Hardener DR 4071, adding 15 - 25 % Thinner DV 4900 to the lacquer/ hardener mixture Allow to dry for 2 h / 20 °C Top coat: 1 x 130 - 160 g/m² Hesse PU SOFT-GRIP DU 44130, mixing ratio (by volume) 5 : 1 with PU
accent colour of at most 50 - 60 g/m² UNA-COLOR DB 45245-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 + 20 - 30 % PU Thinner DV 490 Allow to dry for 3 - 5 h Use 150 - 280 grit to sand surface [...] with PU Hardener DR 4071 and diluted with 15 % PU Thinner DV 490 Allow to dry for at least 16 h / 20 °C Intermediate sanding: 280 - 320 grit Apply 1 - 2 x 150 - 200 g/m² base tone UNA-COLOR DB 45245-(colour [...] effect on virtually any surface. How to – Spatula plastering effect Ensure that priming foil, laminated chipboard or MDF surfaces are well sanded Prime with 1 - 2 x 150 - 200 g/m² FANTASTIC-FILL DP 4755-9343
as necessary Dry for at least 3 h / 20 °C room temperature Apply two top coats, with intermediate sanding grain 320, using FANTASTIC-NATURA DA 48660 mixing ratio (by volume) 10 : 1 with PU Hardener DR [...] The material safety data sheet as per regulation (EC) No. 1907/2006 is available. Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail [...] Softwood surfaces in a relief look How to – Relief look Technical information Relief optic on softwood Products required Note Contact partner Softwood surfaces in a relief look Softwood surfaces in a relief
of charge. Link to the selection Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
sample free of charge. To the shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
sampler – easy and digital Available to download here It’s a handy replacement for the familiar glaze lacquer sampler – easy and digital It’s a handy replacement for the familiar glaze lacquer sampler – easy
Ing. E. Wildschek & Co. OG Südring 363 9020 Klagenfurt am Wörthersee se) Huber GmbH & Co. KG Ottostraße 13 84030 Landshut se) Huber GmbH & Co. KG Borsigstraße 15 94315 Straubing DF Ross & Sons Limited Unit [...] Jägerwirth 215 94081 Fürstenzell Meesenburg GmbH & Co. KG Oestingstr. 11 a 59063 Hamm Aretz GmbH Feldstrasse 11 46149 Oberhausen Busch & Brunner GmbH & Co. KG Langenheim 1 91580 Petersaurach HBV Hermsdorfer [...] Rauenberg Hesse International GmbH & Co. KG P.O. Box 262455 Sigma Rzeszów Laka 172 36-004 Laka Rüschenschmidt & Tüllmann Borkstr. 9-11 48163 Münster A. W. Dienemann GmbH & Co. KG Malthusstr. 25 28307 Bremen
mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 and addition of 5 – 10 % Thinner DV 490 / DV 4900 to the lacquer/ hardener mixture. Packable: after drying for at least 16 h / 20 °C Ready for [...] surfaces Top coat: 1 x 100 - 120 g/m² UNA-COLOR Glass colour lacquer DB 42105-8004, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 and addition of 5 – 10 % Thinner DV 490 / DV 4900 to the lacquer/ [...] mixing ratio (by volume) 25 : 1 with PU Hardener DR 4076-0002 Intermediate drying: 15 - 30 min / 20 °C Use a gauze rag and light pressure to clean any spray mist from surfaces Top coat: 1 x 100 - 120 g/m² UNA-COLOR
newsletter Category * Please choose Industry Craft E-mail * Please accept the privacy policy * Send * = required field Your point of contact Dirk Reckert DE | EN Sales Assistant CET +492381 963 192 Send E-Mail [...] one- or two-component water-based paints. But you will also find classic PUR lacquers in our range - for interior finishing, staircase construction and ship interior finishing. If there are specifications [...] E-Mail Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail