wood's properties (grain, etc.) • even/smooth out differences in the wood (opaque wood stains are better than bright shades) • hinder changes/distortions to the wood's colour (dark, opaque wood stains [...] coniferous wood. Remove the resin us- ing wood cleaner HBV 243 (dissolve 25 grams in 1 litre of hot water) or using a suitable washout solvent (solvent mixture). • Remove all dirt that is a result of grease and [...] Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Wood stains: advice on wood stains and the most important staining rules Status: 24.09.21 1/2 Descripti
File type: application/pdf
Referenced at:
lye used. - Premium BE 5 oak wood stain is suitable for staining the wood before adding wood lye to oak. - Once dry (approx. 3-4 hours) apply the wood lye as described under "apply wood lye". - Different [...] wood lye, it is certainly advisable to varnish the wood using PUR varnish (only with a lightfast hardener). • Oils and other "acidic" systems are not suitable for coating the wood. For highly strict criteria: [...] ter-based lyes, is usually ruled out in this case (loss of or reduced lye effect). The following method can be used: • Apply the wood lye as described under "apply wood lye". • Leave to dry overnight. • Then
File type: application/pdf
Referenced at:
plastic sponge. Drying: 3 to 6 hours at room temperature (20 °C) Post-staining • BH 59-21491 soft wood post-stain mixed ratio of 1 part wood stain + 10 parts water • Apply wood stain as described in a), b) [...] Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Wood stains: bleaching coniferous wood Status: 13.10.22 1/2 Description/properties: This particularly positive [...] enough then for 50-80 m². Treatment: Wood preparation: • Sand down using 100-120 grit sandpaper (non-ferrous sandpaper) • Remove dust • If the wood is particularly resinous, remove the resin using HBV 243
File type: application/pdf
Referenced at:
Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Staining: Smoking oak Version: 13.10.22 1/2 Products required: • Liquid ammonia BZ 840 / HBV 241 Description/features: [...] another, in a sealable space (e.g. crate covered with PE film). • All metallic parts must be removed on account of the risk of discolouration. • The liquid ammonia BZ 840 / HVB 241 is poured into large [...] with Hydro lacquers also possible • no alkaline residues remaining in the wood after sufficient "degassing time" • substantially deeper penetration into the wood, from several millimetres to centimetres
File type: application/pdf
Referenced at:
liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess - Drying: 6 - 8 h / 20 °C room temperature • Smooth slightly using 320 - 600 grit • Use [...] WETPROTECT-OIL OE 52068 liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess. - Drying: 6 - 8 h / 20 °C room temperature After that again [...] liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess until the entire surface appears uniformly dry - Drying: > 16 h / 20 °C with adequate
File type: application/pdf
Referenced at:
surface of the lacquer with humidity. As a result we recommend sealing with a suitable lacquer topcoat (0.5 - 0.7 mm thick). For specific reasons we are unable to give hard and fast recommendations regarding [...] Hardener DR 4070 30 % thinned with PU Thinner DV 4900 • After drying, intermediate sanding with 320 grain • 2 x coats DG 534 UNA PUR primer mixture ratio 5 : 1 with PU Hardener DR 4070 10 % thinned with PU [...] coats of UNA PUR DE 554, intermediate sanding mixture ratio 5 : 1 with PUR Hardener DR 4070 + at least 20 % PU Thinner DV 4900 The undercoat features, order quantities, thinner addition and drying times
File type: application/pdf
Referenced at:
Order quantity: 80 - 100 g/m² - Standard values: - dust dry 15 - 30 minutes - sandable 2 -3 hours - touch dry - 6 - 8 hours depending on type of lacquer - resistant overnight - completely resilient after approx [...] to spraying: - Compressed air spraying (cup gun) 3 - 4 bar spray pressure - 1.7 - 2 mm diameter jet - Airless spraying only for clear materials - 100 - 120 bar material pressure - 0.18 - 0.23 mm diameter [...] diameter jet - Air-assisted Airless for clear and coloured materials - 80 - 100 bar material pressure - 1 - 2 bar air pressure - 0.28 - 0.33 mm diameter jet - Please refer to the respective technical information
File type: application/pdf
Referenced at:
• 600 -1000 abrasive grain • 1 x high gloss finish • Leave to dry for at least 2 - 5 days depending on the product • or, better still, 2 - 3 wet-on-wet high gloss finishes • Allow to dry for 30 - 60 minutes [...] at least overnight • 320 - 600 abrasive grain or • 3 coats of wet-on-wet primer • Allow to dry for 20 - 45 minutes between each coat • Leave to dry at least overnight • 400 - 600 abrasive grain Please [...] clear and coloured HYDRO (see separate technical information) Sanders: • Orbital sander, 2.5 to 5 mm lift, e.g. by Mirka, Festool, Metabo/Sander, 3M • Specialist abrasive 1,000 - 3,000th grain size, where
File type: application/pdf
Referenced at:
Add 20 - 25 % DV 4994 to the lacquer/hardener mixture Drying: 15 - 20 min / 20 °C • 1 x 150 - 200 g/m² PU OPTI-BASE DG 4750 mixing ratio (by volume) 1 : 5 with PU Hardener DR 4034 Add 20 - 25 % DV 4994 [...] Add 20 - 25 % DV 4994 to the lacquer/hardener mixture Drying: 20 - 30 min / 20 °C • 1 x 150 - 200 g/m² PU Basecoat DG 4760 mixing ratio (by volume) 1 : 3 with PU Hardener DR 4038 Add 20 - 25 % DV 4994 [...] ratio (by volume) 2 : 1 with PU Hardener DR 4035-0001 Add 20 - 25 % DV 4994 to the lacquer/hardener mixture Drying: 20 - 30 min / 20 °C • 1 x 150 - 200 g/m² PU Basecoat DG 4768-0004 mixing ratio (by volume)
File type: application/pdf
Referenced at:
The features of this wood such as - mineral deposits - deep, narrow pores - bleaching when exposed to UV rays - uneven distribution and direction of pores - ingredients - surface hardness require special [...] 1 with HDR 5091 + 10 % water • PUR finish DE 4500x(gloss level) mixing ratio 10 : 1 with DR 4070 + 10 % thinner or MULTI-PUR DE 45x(gloss level) mixing ratio 5 : 1 with DR 4070 + 30 % thinner or PU Multicoat [...] ratio 10 : 1 with DR 4070 + 30 % thinner if necessary as well as mixing ratio 5 : 1 with DR 4070 + 30 % thinner or UNA-PUR DE 4259x(gloss level) mixing ratio 10 : 1 with DR 4070 + 30 % thinner, possibly also
File type: application/pdf
Referenced at:
DR 4071 + 15 - 20 % PU Thinner DV 4900 • UNA-PUR DE 42592 - DE 42597 / DE 552 - DE 557 Mixing ratio 5 : 1 with PU Hardener DR 4070 + 15 - 20 % PU Thinner DV 4900 • PU Multicoat lacquer DE 45002 - DE 45007 [...] DR 4070 + 20 - 30 % PU Thinner DV 4900 • PU Isolating primer DG 4720-0001 / DG 572 Mixing ratio 2 : 1 with PU Hardener DR 4040 / DR 440 + 15 - 20 % PU Thinner DV 4900 • FANTASTIC-CLEAR DE 48772 - DE 48777 [...] 1 with PU Hardener DR 4070 + 5 - 10 % PU Thinner DV 4900 • MULTI-PUR DE 45322-0004 - DE 45327-0004 / DE 452 - DE 457 Mixing ratio 5 : 1 with PU Hardener DR 4070 + 10 - 15 % PU Thinner DV 4900 • Important
File type: application/pdf
Referenced at:
90 - 100 g/m² FANTASTIC-BRILLANT DU 48799, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, addition of 20 - 30 % Thinner DV 4935 to the lacquer/hardener mixture • Intermediate drying: 20 - 40 [...] 40 min / 20 °C • 1 x 100 - 120 g/m² FANTASTIC-BRILLANT DU 48799, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, addition of 20 - 30 % Thinner DV 4935 to the lacquer/hardener mixture • Drying: > [...] chipboard, or MDF surfaces well (grain 220 - 280) • Prime with two coats of 150 - 200 g/m² each of PU Isolating filler DP 491-9343, depending on the substrate material Mixing ratio (by volume) 4 : 1 with PU Hardener
File type: application/pdf
Referenced at:
surfaces (220 - 280 grit) • Subject to substrate material - 1 x basecoat of 150 - 200 g/m² PU Isolating filler DP 4791-9343, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4058, add 10 - 20 % Thinner [...] sanding 280 - 320 grit • Subject to substrate material - 1 x basecoat of 150 - 200 g/m² PU Isolating filler DP 4791-9343, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4058, add 10 - 20 % Thinner DV [...] mixture • Intermediate drying: 20 - 40 min / 20 °C • Apply 1 x 100 - 120 g/m² FANTASTIC-BRILLANT DU 48799, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, adding 20 - 30 % Thinner DV 4935 to the lacquer/
File type: application/pdf
Referenced at:
404 20 - 30 % PU Thinner DV 4935 (winter) or DV 4981 (summer), depending on the lac- quer/hardener mixture • Dry for 72 - 96 hours • Or alternatively even 2 x 90 – 120 g/m² wet-in-wet finishing (20 - 40 minutes [...] coats of 150 - 200 g/m² PU Basecoat DG 468-3 (30 minutes intermediate drying) mixing ratio (by volume) 1 : 3 with PU Hardener DR 438 20 - 30 % PU Thinner DV 4935 (winter) or DV 4981 (summer), depending [...] drying) using PU Basecoat DG 468-3 + addition of 4 % SUN-EX ZD 9501 Mixing ratio (by volume) 1 : 3 with PU Hardener DR 438 20 - 30 % PU Thinner DV 4935 (winter) or DV 4981 (summer), depending on the lac- que
File type: application/pdf
Referenced at:
Intermediate drying: 20 - 40 min / 20 °C • 1 x 100 - 120 g/m² FANTASTIC-BRILLANT DU 48799 + 4 % SUN-EX ZD 9501, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, addition of 10 - 20 % PU Thinner DV 4935 [...] Primer DG 417 (20 - 30 minutes intermediate drying) + 4 % SUN-EX ZD 9501 light-stabilising concentrate, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4070, with addition of 10 - 20 % PU Thinner DV [...] sanding with grain 400 / 600. High gloss: • 1 x 90 - 100 g/m² FANTASTIC-BRILLANT DU 48799 + 4 % SUN-EX ZD 9501, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, addition of 20 - 30 % PU Thinner DV 4935
File type: application/pdf
Referenced at:
addition of 10 - 15 % Thinner DV 4935 to the lacquer/hardener mixture • Drying: > 2 h / 20 °C, preferably 16 h / 20 °C • Primer sanding: 320 - 400 grit (dust removal) • Basecoat: • 1 x 150 - 200 g/m² FAN [...] ratio (by volume) 1 : 1 with PU Hardener DR 4091, addition of 10 - 30 % Special thinner DV 4905 • Intermediate drying 20 - 30 min / 20 °C • 1 x 180 - 250 g/m² ADAMANT DU 48999, mixing ratio (by volume) [...] mixing ratio (by volume) 5: 1 with 2C HYDRO Hardener HDR 5091 (processing viscosity 20 - 25" / DIN 4mm) • Intermediate drying 5 - 6 h / 20 °C with adequate air circulation • 1 x 100 - 120 g/m² HYDRO-PU
File type: application/pdf
Referenced at:
solvent-based lacquer system (surface on the right) and a HYDRO Lacquer system (surface on the left). Beech wood (no dyestuffs/ substances): no difference discernible. Ash wood (little to lots of dyestuffs/ [...] information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Coating: Recoating of HYDRO Stains with water-based lacquers Version: 09.02.23 2/3 Oak wood: (lots to huge amounts of [...] on a type of wood that contains a large proportion of wood sub- stances (such as oak), only the use of a solvent-based "barrier layer" currently prevents the undesirable colour change caused by finishing
File type: application/pdf
Referenced at:
at a single spray booth or spray stand! Please also observe DGUV Rule 100-500 (previously BGR 500) Section 2.29 (Processing of coating materials) paragraph 3.12 5. Only use clean, non-flammable filter mats [...] Technical information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm, Germany www.hesse-lignal.de Coating: processing recommendations for oil products Version: 13 December 2023 1/2 General rec [...] also the oil application’s protective effect on the wood. Most oil products contain unsaturated (vegetable) oils that harden by absorbing oxygen. Heat consequently develops during the drying process and
File type: application/pdf
Referenced at:
you with any information you may require. Hesse GmbH & Co. KG Warendorfer Straße 21 59075 Hamm, Germany Tel.: +49 2381 963 - 00 Fax: +49 2381 963 - 849 info@hesse-lignal.de www.hesse-lignal.com [...] systems to achieve a sustainable future Page 2 Page 3 “Each and every one of us can make their own contribution to the environment and climate protection – we want to be active in playing our part.” Hans J [...] warming potential (GWP). Studies have shown that solvent-based lacquers have the highest carbon footprint, and 100% UV systems without fossil raw materials have the lowest. “Switching from solvent-based
File type: application/pdf
Referenced at:
match with the standard colour tone. Therefore, they can only be used as an orientation aid. The „same“ NCS colour for different lacquer manufacturers. There are, of course, many reasons why colour tones [...] to which the colours are formulated and The colourful world of colours and colour cards Hesse GmbH & Co. KG | Warendorfer Str. 21 | D-59075 Hamm | www.hesse-lignal.com If two objects need to have the same [...] can also use this process in the furniture sector to present the optimal results to your customers – for example, if a single component must be newly produced and added to the middle of an older kitchen
File type: application/pdf
Referenced at:
according to the DiBt (German Institute for Structural Engineering) principles ■ ChemVOCFarbV (the “Decopaint Directive”) ■ LEED (Leadership in Energy and Environmental Design) ■ DGNB (German Sustainable Building [...] Building Council) ■ BNB (Assessment System for Sustainable Building) ■ Dubai Green Buildings regulations PURA-NATURA O rd er n um be r: XF P N E I V er si on : J ul y 20 21 Hesse GmbH & Co. KG | Warendorfer [...] is the same as for conventional Hydro-lacquer systems and is ideal for any professional joiner / carpenter / interior fitter or parquet layer. PURA-NATURA can be obtained from any Hesse-Lignal distributor
File type: application/pdf
Referenced at:
forward to hearing from you. www.hesse-lignal.com Hesse GmbH & Co. KG Warendorfer Straße 21 D-59075 Hamm Phone: +49 2381 963-00 Fax: +49 2381 963 - 849 info@hesse-lignal.de [...] Onboarding Onboarding complete 1. Requirements management 2. Quick Check 3. Reality check 4. Development / 5. Tests 6. Verification 7. Test operation 8. Production successful Optimization Specification ACTUAL [...] communication with you. This step also includes clarification of the general commercial conditions (willingness to invest, costs per square metre, indicative offer). • In the case of product adaptation, the
File type: application/pdf
Referenced at:
supplied gloss level 25, semi matt (300 µm on test card Chromolux 700 A neutral without hardener; 60° angle) • Mixture details for gloss level 40, silky gloss (300 µm on test card Chromolux 700 A neutral [...] Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: gloss resin solution EL 460-0028 Version: 27.05.21 1/1 Adding the gloss resin solution EL [...] to our terms and conditions of business. The Material Safety Data Sheet according to the regulation (EC) No. 1907/2006 is available.
File type: application/pdf
Referenced at:
base, DBM 46014-M0999 base • PU Metallic top coat DU 45457-99060 (mother of pearl), - 99009 (fine), - 99012 (medium), - 99015 (coarse) • PU Multicolour effect lacquer DU 45457-99062 • PU Granite effect [...] information for the relevant items DB 42105-(colour tone) or the general technical information sheet “Effects – PU glass lacquers base UNA-COLOR DB 45245-(colour tone)”. Please mix as follows to achieve the quality [...] Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: glass lacquer additive EL 460-0025 Version: 02.09.21 1/1 Adding the glass lacquer additive
File type: application/pdf
Referenced at:
Technical information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: HYDRO structuring pastes Status: 25 January 2023 1/1 Adding of different Structure pastes [...] corresponding Pearl Structure paste This way modified colour lacquer should be additionally marked with “pearl effect”. Use: • Stir all materials carefully before use. • Stirring by hand ensures good incorporation [...] to our terms and conditions of business. The Material Safety Data Sheet according to the regulation (EC) No. 1907/2006 is available.
File type: application/pdf
Referenced at: