HYDRO Isolating filler HP 6633-(colour tone)

Single-component HYDRO primer, water-dilutable pigmented, thixotropic formula, very good filling properties. Filling primer for closed-pore lacquer applications with excellent stability. Free from methylpyrrolidon.

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

especially thixotropic
Good body
For closed-pore structures

Processing

Airmix
Compressed air spraying

78%sustainable

water 33%
mineral resources 45%
fossil resources 22%

Areas of application

For all interior fittings in living areas, on an extremely wide range of wood types, priming foils and MDF, and MDF including edges.

Technical information

PDF

HYDRO Isolating filler HP 6633-(colour tone) 2 MB

Sustainability data sheet

PDF

HYDRO Isolating filler HP 6633-(colour tone) 768 KB

Certificates

PDF

PRODUCT CONFORMITY CERTIFICATE 2023 AL SA'FAT DUBAI GREEN BUILDING SYSTEM Scope - EN 186 KB

PDF

PRODUCT CONFORMITY CERTIFICATE 2023 AL SA'FAT DUBAI GREEN BUILDING SYSTEM 292 KB

Technical Specifications

Appearance	opaque
Decopaint base	wb
Decopaint category	I
Number of layers (max)	3
Quantity per layers (min)	120 g/m²
Quantity per layers (max)	300 g/m²
Total quantity applied	600 g/m²

Processing Instructions

Drying	2 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	16 h / 20 °C
Surface sanding (grain size)	120 - 400
Intermediate sanding (grain size)	280 - 400
Yield per pass	8 - 9 m²/l
Processing information	Sanding of the suitable surface in accordance with regulations. Intermediate sanding primarily by hand or using a Fladder device; subsequent dust removal. Can be thinned with up to 5 % water. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904.
Special notes	Woods rich in active substances, such as ash, which tend to discolour when coated with pastel-coloured HYDRO colour systems should always be pre-treated with dual-component primers, such as: PERFECT-FILL HDP 5650-9343 or HDP 5650-9343. Pre-prime exotic woods such as Macassar ebony or extremely resinous knotty pine with PU Isolating primer DG 4720-0001.

Procedure example

Cabinet, MDF, white, semi matt

MDF sanding, 220 -280 grit, with following de-dusting.

Basecoat 2 x 150 - 200 g/m² Hesse HYDRO Isolation primer HP 6633-9343.

Intermediate drying at least 2 h / 20 °C, or better 16 h / 20 °C room temperature with sufficient air circulation.

Graduated lacquer sanding by hand, 240 - 400 grit with following dust removal.

Top coating 1 x 110 - 130 g/m² Hesse COOL-COLOR HB 65285-9010.

Packable: after drying for at least 16 h / 20 °C room temperature with sufficient air circulation.

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.