NOVA-PUR Basecoat DG 4734
DG 4734 is a light fast, fast drying base coat for open- to closed-pore surface processes. Very elegant surfaces are quickly and assuredly achieved in combination with appropriate intermediate and finishing lacquers in gloss levels dull matt to glossy. This product can be sanded superbly with machines and by hand. It can also be used on bleached wood.
Enquire articlePage content
- fast drying and light fast
- superb sanding properties
- resistant to peroxide so can be used on bleached woods
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
- mineral resources 1%
- fossil resources 99%
Areas of application
DG 4734 can be used for shopfitting and on all interior fixtures and fittings, including in kitchens and bathrooms as well as for coatings in ship interiors.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| VOC EU % | 68,9 % |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 300 g/m² |
| Mixing ratio (volumetric) | 5 : 1 | Hardener: DR 4070 |
| Mixing ratio (gravimetric) | 100 : 20 | Hardener: DR 4070 |
Processing Instructions
| Potlife | 8 h / 20 °C |
|---|---|
| Drying | 4 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 180 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | 8 - 9 m²/l |
| Processing information | Forced drying is possible at up to 50 °C. |
| Special notes | This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 100 g/m². “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
NOVA-PUR Basecoat DG 4734Your request for the series
NOVA-PUR Basecoat DG 4734
