PU Base Coat DG 4708-0015

Hesse PU Basecoat DG 4708-0015 is a two component PU Basecoat with a polyester resin basecoat. This well bodied product is configured to be highly thixotropic. The distinguishing feature of this basecoat is its powdery nature when sanded and it can be applied electrostatically, if required.

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Technical Specifications

Processing Instructions

Procedure example

Highlights

Electrostatic coating is possible
especially thixotropic
Particularly good body
sands well with industrial sanding machines

Processing

2C line
Airless
Airless low pressure
Airmix
Compressed air spraying
Electrostatic
High-performance automatic spraying unit
Automatic spray gun
Spraying robot

5%sustainable

water 1%
mineral resources 4%
fossil resources 95%

Areas of application

This PU basecoat can be used for all interior fittings and for coatings in kitchens and bathrooms for a full to closed-pore surface ready for a suitable top coat.

Technical information

PDF

PU Base Coat DG 4708-0015 2 MB

Sustainability data sheet

PDF

PU Base Coat DG 4708-0015 488 KB

Technical Specifications

Proportion of renewable raw materials %	0 %
Appearance	colourless
VOC EU %	52,5 %
Number of layers (max)	2
Quantity per layers (min)	120 g/m²
Quantity per layers (max)	180 g/m²
Total quantity applied	360 g/m²
Mixing ratio (volumetric)	2 : 1 \| Hardener: DR 4035
Mixing ratio (gravimetric)	100 : 49 \| Hardener: DR 4035

Processing Instructions

Potlife	2 h / 20 °C
Drying	1,5 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	4 h / 20 °C
Surface sanding (grain size)	150 - 180
Intermediate sanding (grain size)	320 - 400
Yield per pass	6 - 8 m²/l
Special notes	The product is not suitable for use on bleached surfaces! Greying may occur if multiple coats are applied or in the event of greater coat thicknesses on dark woods or stains. Our recommendation for these purposes: DG 4708-0003. Do not use the product on light woods or woods stained with non-wood stain colours! DG 4708-0015 is a suitable basecoat for electrostatic application with DU 4401x(gloss-level)-0003 as the top coat. The conductivity can be adjusted with NR 1075, as necessary. Add around 0.05 to 0.1 %.

Procedure example

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.