PU brillant lacquer DU 44099

DU 44099 is an ideal transparent, high gloss lacquer for coatings on natural wood already pre-primed to be closed-pore with a very low tendency to sinkage. This product has good body and dries to be very brilliant and high gloss, combined with optimal sanding / polishing properties.

Enquire article

Page content

Product features

Areas of application

Technical information

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

dries to be particularly brilliant
ideal on natural wood
can be polished and buffed with very little effort

Processing

2C line
Airless
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot

1%sustainable

mineral resources 1%
fossil resources 99%

Areas of application

DU 44099 can be used for shopfitting and on all interior fixtures and fittings, including in kitchens and bathrooms as well as for coatings in ship interiors.

Technical information

PDF

PU brillant lacquer DU 44099 2 MB

Certificates

PDF

Quality assurance system certificate Module D Directive 9698EG on marine equipment (IMO) 1 MB

PDF

Declaration of Conformity (IMO) 132 KB

PDF

EC-type Examination certificate Module B (IMO) 132 KB

Technical Specifications

Proportion of renewable raw materials %	0 %
Appearance	colourless
VOC EU %	54,3 %
Number of layers (max)	2
Quantity per layers (min)	100 g/m²
Quantity per layers (max)	120 g/m²
Total quantity applied	240 g/m²
Mixing ratio (volumetric)	2 : 1 \| Hardener: DR 4080
Mixing ratio (gravimetric)	100 : 53 \| Hardener: DR 4080

Processing Instructions

Potlife	4 h / 20 °C
Drying	16 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	3 d / 20 °C
Surface sanding (grain size)	120 - 180
Intermediate sanding (grain size)	400 - 800
Yield per pass	8 - 10 m²/l
Processing information	When being used as a flame-retardant coating material for seagoing vessels, the maximum total application amount in wet film is 120 g/m². Hesse polyurethane Brilliant lacquer can be polished and buffed after drying for at least 3 d / 20 °C.
Special notes	This product is not suitable for use on bleached surfaces! When being used as a flame-retardant coating agent for seagoing vessels in accordance with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120, this product may only be combined with other approved and technically suitable products. For top coating of coloured lacquer surfaces and non-wood stained substrates, we recommend Hesse FANATASTIC-BRILLANT DU 48799. Pre-priming is possible depending on the desired surface and substrate, e.g. with Hesse PU Primer DG 4720-0001 (as isolating primer), 4768-0004, DG 4768-0009 and DG 4760.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”

Procedure example

Contract installation in natural walnut, high gloss

Isolation: 2 x Hesse PU Isolating primer DG 4720-0001 with intermediate drying (20 - 30 min / 20 °C room temperature), mixing ratio (by volume) 2 : 1 with PU Hardener DR 4040 and the addition of 5 - 10 % Thinner DV 4994 in relation to the lacquer/hardener mixture

Drying: 2 h / 20 °C

Lacquer sanding: 320 - 400 grit (dust removal)

Basecoat: as necessary 2 - 3 x 100 - 250 g/m² Hesse PU Basecoat DG 4760 with intermediate drying (10 - 30 min / 20 °C room temperature), mixing ratio (by volume) 1 : 3 with PU Hardener DR 4038 and the addition of 20 - 30 % Thinner DV 4935 or DV 4981 (at high temperatures and on large surfaces) in relation to the lacquer/hardener mixture

Drying: at least 16 h / 20 °C

Lacquer sanding: 320 - 400 grit (dust removal)

Basecoat: as necessary 2 - 3 x 100 - 250 g/m² Hesse PU Basecoat DG 4760 with brief intermediate drying (10 - 30 min / 20 °C room temperature) , mixing ratio (by volume) 1 : 3 with PU Hardener DR 4038 and the addition of 20 - 30 % Thinner DV 4935 or DV 4981 (at high temperatures and on large surfaces) in relation to the lacquer/hardener mixture

Drying: at least 16 h / 20 °C

Another basecoat can be applied if necessary. After adequate drying, sand the last basecoat layer using 400 - 800 grit depending on the type of wood and colour tone (dust removal).

Top coat: 2 x Hesse PU Brilliant lacquer DU 44099 with intermediate drying (20 - 30 min / 20 °C room temperature), mixing ratio (by volume) 2 : 1 with PU Hardener DR 4080 and the addition of 20 - 30 % Thinner DV 4935 in relation to the llacquer/hardener mixture

Dust dry: after 10 - 20 min / 20 °C

Ready for packaging/polishing: after at least 3 d / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.