PUR PU Pearlstructure DB 42610-(colour tone) very fine

A two-component, pigmented acrylate resin lacquer based on FANTASTIC-COLOR and formulated with a very fine structural paste. This light fast lacquer material is characterised by its high mechanical resistance and is thus best suited for coating hard-wearing surfaces. The coarse, high-quality texturing agent gives the product an especially tactile effect.

Enquire article

Page content

Product features

Areas of application

Technical information

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

sophisticated pearl texture coating with uniform effect formation
Direct coating on many laminate surfaces possible
good mechanical resistance, no top coat necessary
very good thixotropy

Processing

2C line
Airless
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot

25%sustainable

renewable resources 1%
mineral resources 24%
fossil resources 75%

Areas of application

The Hesse structured lacquer can be used for all interior purposes, including areas with a high degree of wear, such as kitchens and bathrooms on filled surfaces. The good opacity and adhesion to the substrate also allows it to be directly applied onto many primer foils.

Technical information

PDF

PUR PU Pearlstructure DB 42610-(colour tone) very fine 2 MB

Certificates

Technical Specifications

Appearance	opaque
Number of layers (max)	1
Quantity per layers (min)	120 g/m²
Quantity per layers (max)	150 g/m²
Total quantity applied	150 g/m²
Mixing ratio (volumetric)	10 : 1 \| Hardener: DR 4071
Mixing ratio (gravimetric)	100 : 10 \| Hardener: DR 4071

Processing Instructions

Potlife	6 h / 20 °C
Drying	2 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	16 h / 20 °C
Surface sanding (grain size)	150 - 320
Intermediate sanding (grain size)
Yield per pass	7 - 9 m²/l
Processing information	Hardening PU Pearl structure at 5 : 1 with PU Hardener 4076-0001 after previously mixing in 5 % Glass lacquer additive EL 460-0025 to the lacquer components also enables direct coating on glass. We recommend using Cleaning thinner ZD 101 to clean glass surfaces prior to application. PU Pearl structure can also be applied at a mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070.Direct application on untreated MDF should only be performed at a mixing ratio (by volume) 10 : 1 with PU Hardener 4071!
Special notes	Pre-priming is possible depending on the desired finish and substrate, for example with: DP 4755-9343 and DP 4791-9343.

Procedure example

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.