
REMOVER OS 5600
A highly effective, water-based cleaning concentrate, for removing old care products from sealed parquet and wooden floors.
Enquire articlePage content
- water-dilutable and thus very economical
- highly effective
- strong cleaning power
Processing
- water 78%
- renewable resources 1%
- mineral resources 1%
- fossil resources 20%
Areas of application
Removes residues of Hesse AQUA-REFRESHER, PROTECT-CLEANER and similar care products, as well as stubborn soiling and footprints.
Technical information
Sustainability data sheet
Technical Specifications
Proportion of renewable raw materials % | 0,06 % |
---|---|
Appearance | colourless |
VOC EU % | 9,3 % |
Processing Instructions
Surface sanding (grain size) | |
---|---|
Intermediate sanding (grain size) | |
Yield per pass | m²/l |
Processing information | Einschichtiger Auftrag. Hesse REMOVER OS 5600 is diluted with water according to the degree of soiling and the surface to be cleaned is wiped evenly damp. Initial cleaning: approx. 1 l of Hesse REMOVER OS 5600 to 5 l of cleaning water. Mop the floor with this cleaning solution and leave to infiltrate for 5 minutes. The application quantity and infiltration time should be gauged so that no swelling of the wood occurs! Then mop the surface again with clean water to remove the dissolved coating and any potential remover residue. Make sure that the surface does not get too wet during mopping! |
Special notes | A highly effective, water-based cleaning concentrate, for removing old care products from sealed parquet and wooden floors. Removes residues of Hesse AQUA-REFRESHER, PROTECT-CLEANER and similar care products, as well as stubborn stains and footprints. For large surfaces, it is recommended to divide the surface into subsection. The suitability of the substrate for the use of Hesse REMOVERS OS 5600 should be tested in one location before a full surface application. The cleaning effect for specific contaminants should also be tested. Experience suggests that stains that are already present on the existing surface of the coating, or that have already infiltrated into the wood, can no longer be completely removed by subsequent cleaning and maintenance. After complete drying of the residue-free cleaned surface, a new care treatment or suitable surface treatment is required. Caution: too much water and/or too long an exposure can cause the wood to swell and damage it. Therefore, after work performed by professionals whenever possible. REMOVER residues left on the surface affect the adhesion of subsequent care products. Keep locked away andout of the reach of children! Containers should only be put out for recycling when they have been completely emptied. |
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article

Your request for the series
