Acrylic Brilliant Lacquer DU 46269-0005

The crystal clear, high-gloss and full depth properties set the Acrylic Brilliant Lacquer apart as a final coating for colour lacquer surfaces. Thanks to its excellent lightfastness, this lustre is retained over the long term, even with intensive use. Standard polishing and buffing machines can be used to bring the lacquer to a mirror-like high gloss finish with little effort. Natural wood and peroxide-bleached wood types also unfurl their full effect under this clear lacquer - provided they have been prepared with transparent PUR base coats beforehand. The result is a technically impressive surface that also impresses at an emotional level: clear, brilliant and elegant.

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

High-gloss, lightfast, and extremely brilliant
Suitable for bleached wood types
Can be polished and buffed
Complies with the See-BG / IMO test certificate

Processing

2C line
Airless
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot

1%sustainable

mineral resources 1%
fossil resources 99%

Areas of application

Versatile application for all shop fitting and interior design requirements. Also perfect for high-quality kitchen and bathroom designs.

Technical information

PDF

Acrylic Brilliant Lacquer DU 46269-0005 2 MB

Sustainability data sheet

PDF

Acrylic Brilliant Lacquer DU 46269-0005 1 MB

Certificates

PDF

Quality assurance system certificate Module D Directive 9698EG on marine equipment (IMO) 1 MB

Technical Specifications

Proportion of renewable raw materials %	0,00 %
Appearance	colourless
VOC EU %	53,74 %
Number of layers (max)	2
Quantity per layers (min)	100 g/m²
Quantity per layers (max)	150 g/m²
Total quantity applied	300 g/m²
Mixing ratio (volumetric)	2 : 1 \| Hardener: DR 4078
Mixing ratio (gravimetric)	100 : 50 \| Hardener: DR 4078

Processing Instructions

Potlife	5 h / 20 °C
Drying	2 d / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	3 d / 20 °C
Surface sanding (grain size)	400 - 800
Intermediate sanding (grain size)	600 - 800
Yield per pass	m²/l
Processing information	DU 46269-0005 is polishable after 48 h / 20 °C and a humidity of 40 - 45 %. These details may change if the climatic conditions vary greatly and should be reviewed individually as necessary.The processing viscosity must be set by the user themselves. We recommend an addition of 20 - 30 % thinner DV 4935 to the lacquer/hardener mixture.Pre-priming is possible depending on the desired surface and substrate, for instance using base coats MEGA-PU Basecoat DG 4717-0005, PU Basecoat DG 4760 or the colour lacquer ranges FANTASTIC-COLOR DB 4888x(gloss level)-(colour tone) and UNA-COLOR DB 4524x(gloss level)-(colour tone).On bleached woods, DU 46269-0005 must be used in combination with MEGA PU Basecoat DG 4717-0005.If a high-gloss surface with particularly high scratch resistance is required, we recommend using the transparent high-gloss lacquer ADAMANT DU 48999. Please refer to the separate technical information for the product.
Special notes	This product is only permitted to be combined with other approved and technically suitable products if it is to be used as a low-flammable coating for seagoing vessels in accordance with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, latest version, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when this product is used as a low-flammable coating for seagoing vessels is 120 g/m².“A risk assessment has been conducted in accordance with Directive 2014/90/EU, Annex II, Section 3. The hardened and dried coating poses neither a physical or health hazard nor a hazard to the environment.”

Procedure example

Substrate material: MDF with a priming film

Surface sanding: 320 - 400 grit (dust removal)

Edge and profile sanding: grit 150 - 180 (dust removal)

Basecoat: 1 x 150 - 200 g/m² FANTASTIC-FILL DP 4755-9343

Mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071

Add 15 % thinner DV 4900 to the lacquer/ hardener mixture

Drying: > 2 h / 20 °C, preferably 16 h / 20 °C

Filler sanding: 320 - 400 grit (dust removal)

Basecoat: 1 x 150 - 200 g/m² FANTASTIC-FILL DP 4755-9343

Mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071

Add 15 % thinner DV 4900 to the lacquer/ hardener mixture

Drying: > 2 h / 20 °C, preferably 16 h / 20 °C

Filler sanding: 320 - 400 grit (dust removal)

Drying: > 16 h / 20 °C

Filler sanding: 320 - 400 grit

Colour coating: 1 x 120 - 180 g/m² FANTASTIC-COLOR DB 48882-9016

Mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071

Addition of 20 - 30 % thinner DV 4900 or DV 4935 to the lacquer/hardener mixture

Drying: 16 h / 20 C°

Fine sanding: 600 - 800 grit

High gloss finishing: 2 x 100 - 120 g/m² with an intermediate drying time of 30 - 60 min / 20 °C Acrylic Brilliant Lacquer DU 46269-0005

mixing ratio (by volume) 2: 1 with PU Hardener DR 4078

Add 20 - 30 % thinner DV 4935 based on the lacquer/hardener mixture

Drying: > 48 h / 20 °C

The Acrylic Brilliant Lacquer DU 46269-0005 can now be polished and buffed as required.

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.