BRILLANT-COLOR DB 44099-(colour tone)
DB 44099-(colour tone) is a coloured high-gloss paint with an impressive paint flow. The powerfull filling product dries to a very brilliant and high gloss, compounded with optimum sanding/polishing properties. The coloured high gloss lacquer is available in almost all colour tones.
Artikel anfragen- impressive lacquer distribution
- dries to be particularly brilliant
- can be polished and buffed with very little effort
Processing
Areas of application
BRILLANT-COLOR DB 44099-(color tone) can be used in the complete field of interior fittings, including kitchens and bathrooms as well as ship interior fittings. BRILLANT-COLOR has also been tested in combination with FANTASTIC-FILL in accordance with German Industrial Standard EN 13501.
Page content
Technical information
Certificates
Technical Specifications
Appearance | opaque |
---|---|
Number of layers (max) | 4 |
Quantity per layers (min) | 70 g/m² |
Quantity per layers (max) | 130 g/m² |
Total quantity applied | 350 g/m² |
Mixing ratio (volumetric) | 2 : 1 |
Mixing ratio (gravimetric) | 100 : 51 |
Processing Instructions
Potlife | 4 h / 20 °C |
---|---|
Drying | 16 h / 20 °C |
Due to hardening | 7 d / 20 °C |
Surface sanding (grain size) | 320 - 400 |
Intermediate sanding (grain size) | 400 - 800 |
Yield per pass | 8 m²/l |
Special notes | Please also refer to the separate Technical Information on the subject of "Polishing/buffing". Depending on the desired surface and substrate, pre-priming is possible, e.g. with Hesse PU insulating filler DP 4791-9343,FANTASTIC-FILL DP 4755-9343 or FANTASTIC-FILL DP 4755-9005. An intermediate coat of Hesse PU Colour lacquer DB 45245-(colour tone) in the same colour tone as the selected Hesse PU Brilliant lacquer DB 44099-(colour tone), applied between filling power and high gloss, has a positive effect on the ability to stay on vertical surfaces! "A risk assessment has been carried out in accordance with Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating poses neither a physical or health hazard nor a hazard to the environment."When used as a low-flammable coating for seagoing vessels in accordance with SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, latest version, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, this product can only be combined with other approved and technically suitable products. The maximum wet application rate when using this product as a low-flammable coating for seagoing vessels is 120 g/m². |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.