Colour stain BC 85-(colour tone) for spraying and wiping off
Ready to use HYDRO pigment stain. Transparent to opaque stain appearances are achieved using Hesse BC colour stains. Opaque colours can be formulated, for instance according to RAL, Sikkens or NCS colour cards. Although the use of extremely fine, micronised pigments means that you obtain higher transparency and brilliance than is usual for this type of stain. The structure of the wood is covered more or less effectively depending on the depth of colour tone. This also allows you to create colour tones that are lighter that the inherent hue of the wood. The light fastness of colour stains represents the maximum that can be achieved amongst all stains. Formulated for specific species of wood.
Artikel anfragen- Can be used on many woods
- All tones can be mixed with each other
- Spraying with wiping
- Use for tones uncommon in wood, for instance according to RAL
Processing
Airless low pressure
Airmix
Compressed air spraying
Spreading
Wiping with a cloth
Areas of application
For furniture manufacturing and interior fittings. These stains can be sprayed and then wiped.
Technical information
Technical Specifications
| Appearance | glazing |
|---|---|
| Number of layers (max) | 1 |
| Quantity per layers (min) | 50 g/m² |
| Quantity per layers (max) | 80 g/m² |
| Total quantity applied | 80 g/m² |
Processing Instructions
| Drying | 3 h / 20 °C |
|---|---|
| Surface sanding (grain size) | 150 - 240 |
| Intermediate sanding (grain size) | |
| Yield per pass | 15 - 40 m²/l |
| Processing information | Apply stain with some excess. Use a suitable brush to uniformly spread this excess first crosswise then along the grain. The stain should only appear slightly damp as opposed to wet after wiping. Uneven wiping leads to differences in colour tone. Strong opaque effects can be achieved by subsequent misting. Stir stains well before and during processing. The stains can be thinned with water, if required. We recommend small spray nozzle sizes for stains that are to be sprayed but not subsequently wiped. Although large spray nozzle sizes are advisable when spraying stains that are subsequently to be wiped. |
| Special notes | Hesse stains are matched to each type of wood in terms of colour tone and application. Additional types of application and woods are available. All stains from the same range can be mixed together. Lighten by adding water. Can be tinted with colour concentrates in the range: BP 30xx, BP 3570. Priming with HYDRO lacquers can result in discolorations when using wood species with a high proportion of water-soluble wood constituents (e.g.oak). We therefore recommend a PU base coat, especially in the case of pastel or white colour tones. |
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
Colour stain BC 85-(colour tone) for spraying and wiping offYour request for the series
Colour stain BC 85-(colour tone) for spraying and wiping off
