FANTASTIC-FILL DP 4755-9343
FANTASTIC-FILL is an acrylate-based polyurethane isolation primer with excellent body and remarkable surface smoothness, which in parallel optimises sanding characteristics and shortens the sanding process. Its application-friendly thixotropy also facilitates application on edges and vertical components, without negatively impacting levelling on horizontal surfaces. Even after brief drying, a surface treated with FANTASTIC-FILL can easily be lacquered from the rear and stored in a trolley. FANTASTIC-FILL has deliberately been developed for process-oriented, powdery manual and machine sanding.
Artikel anfragen- excellent levelling similar to a colour lacquer
- superb anti-sagging properties on vertical surfaces
- fast drying and stacking strength
- outstandingly easy to sand back by hand and machine
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
Areas of application
FANTASTC-FILL can be used for shopfitting and on all interior fixtures and fittings, including in kitchens and bathrooms and the furnishing of ship interiors. Depending on application method, FANTASTIC-FILL can also be used in different hardening versions.
Page content
Technical information
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | opaque |
| VOC EU % | 37,5 % |
| Number of layers (max) | 4 |
| Quantity per layers (min) | 140 g/m² |
| Quantity per layers (max) | 350 g/m² |
| Total quantity applied | 800 g/m² |
| Mixing ratio (volumetric) | 10 : 1 |
| Mixing ratio (gravimetric) | 100 : 7 |
Processing Instructions
| Potlife | 8 h / 20 °C |
|---|---|
| Drying | 2 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | 150 - 320 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | 4 - 10 m²/l |
| Special notes | A mixing ratio (by volume) of 10 : 1 / (by weight) 100 : 7 with PU Hardener DR 4071 means that FANTASTIC-FILL can be universally used with isolating filler properties. FANTASTIC-FILL in this hardening can also be used on the following sanded metals from which any grease has been removed: iron, galvanized iron, V2A sheet steel and aluminium. And additionally on ABS and PVC plastics after careful surface sanding and cleaning. Deviating metals and plastics will require testing. Apply a trial coating as necessary.A mixing ratio (by volume) of 10 : 1 / (by weight) 100 : 7 with PU Hardener DR 4070 means that FANTASTIC-FILL can be applied on light and dark woods (except exotic species) and a substrate of laminated MDF or chipboard with ABS or PVC edge coating. Application on bare MDF surfaces and edges is possible using a mixing ratio (by volume) of 10 : 1 / (by weight) 100 : 7 with PU Hardener DR 4071 or (by volume) 5 : 1 / (by weight) 100 : 14 with DR 4070!A mixing ratio (by volume) of 3 : 1 / (by weight) 100 : 24 with PU Hardener DR 4076-0001 means that FANTASTIC-FILL can also be used as an isolating filler. Without the addition of thinner, FANTASTIC-FILL with DR 4076-0001 is Decopaint compliant and thus meets ChemVOC FarbV.This product may only be combined with other approved and technically suitable products when used as per the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when used with DP 4755-9343 as a flame-retardant coating for seagoing vessels is 100 g/m².On MDF substrates: Thick boards that have been created by gluing together several thinner boards are, due to the variance in tension, susceptible to edge ridging. It is better to select a single MDF board of the appropriate thickness. Panels that have been glued together should always be sanded flat at the edges and colourlessly pre-insulated. Any water introduced by gluing must be allowed to evaporate prior to coating.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
FANTASTIC-FILL DP 4755-9343Your request for the series
FANTASTIC-FILL DP 4755-9343
