HYDRO-PU Brilliant-Color HDB 54799-(colour tone)
Two component HYDRO-PU acrylate coloured lacquer system with good body, light fast, pigmented, high gloss and with outstanding chemical and mechanical resistance. It can be polished and buffed, PVC-resistant, cream and sweat resistant and light fast. Free from N-methylpyrrolidone and phthalate plasticisers, therefore also suitable for coating children's toys.
Artikel anfragen- Good body
- Light-fast
- outstanding chemical and mechanical resistance
- good polishing and buffing properties
Processing
Areas of application
For high quality residential furniture with sophisticated surfaces and all interior fittings including kitchens and bathrooms.
Page content
Technical information
Sustainability data sheet
Certificates
Technical Specifications
Appearance | opaque |
---|---|
Decopaint base | wb |
Decopaint category | J |
Number of layers (max) | 2 |
Quantity per layers (min) | 100 g/m² |
Quantity per layers (max) | 120 g/m² |
Total quantity applied | 240 g/m² |
Mixing ratio (volumetric) | 5 : 1 |
Mixing ratio (gravimetric) | 100 : 19 |
Processing Instructions
Potlife | 2 h / 20 °C |
---|---|
Drying | 16 h / 20 °C |
Due to hardening | 7 d / 20 °C |
Stackable according to | 3 d / 20 °C |
Surface sanding (grain size) | 320 - 400 |
Intermediate sanding (grain size) | 400 - 600 |
Yield per pass | 9 m²/l |
Processing information | Sanding of the basecoat with 400 - 600 grit / dust removal. Work the hardener in well, then use water (around 20 %) to adjust the spray viscosity to 20 - 25” (DIN 4 mm). The hardener must always be added before thinning! Only ever apply 1 coat of at most 120 g/m² in one operation. Do not apply several thin coats with brief intermediate drying, as may be common with other high gloss systems. Drying of the first coat until application of the subsequent:: 5 - 6 h at 20 °C room temperature and with adequate air circulation. Never store product mixed with hardener in closed containers. After suitable drying can be recoated with the same product. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. |
Special notes | HYDRO-PU Multicoat lacquers and top coats are optimised for use on 2-coat hydro systems. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.