UNA-PUR DE 55x(gloss level)
UNA-PUR is a light fast and transparent multicoat lacquer. Its wide variety of uses and uncomplicated application make UNA-PUR outstanding as a multi-coat lacquer on all customary wood species and in parallel an excellent finishing lacquer on Hesse PU colour lacquers. Given its superb adhesion properties, UNA-PUR can also be applied on bleached woods in gloss levels from dull matt to glossy.
Artikel anfragen- universal use
- simple application
- can be used on bleached woods; superb adhesion properties
Processing
Areas of application
UNA-PUR can be used for shopfitting and all interior fixtures and fittings, including in kitchens and bathrooms as well as the fitting out of ship interiors. UNA-PUR can in parallel be used in different hardening versions. Detailed information on this can be found under “Specific instructions” in this technical information.
Page content
Technical information
Certificates
Technical Specifications
Appearance | colourless |
---|---|
Number of layers (max) | 3 |
Quantity per layers (min) | 100 g/m² |
Quantity per layers (max) | 150 g/m² |
Total quantity applied | 450 g/m² |
Mixing ratio (volumetric) | 10 : 1 |
Mixing ratio (gravimetric) | 100 : 10 |
Processing Instructions
Potlife | 3 d / 20 °C |
---|---|
Drying | 2 h / 20 °C |
Due to hardening | 7 d / 20 °C |
Stackable according to | 16 h / 20 °C |
Surface sanding (grain size) | 150 - 400 |
Intermediate sanding (grain size) | 280 - 400 |
Yield per pass | m²/l |
Processing information | Hardening the lacquer (by volume) at 5 : 1 with PU Hardener DR 4070 or 10 : 1 with PU Hardener DR 4071 is advisable when coating critical substrates or to optimise chemical and mechanical resistance. Hardening the lacquer (by volume) at 5 : 1 with PU Hardener DR 4076-0001 after prior mixing of 5 % Glass lacquer additive EL 460-0025 to the lacquer components also enables direct coating on glass. The glass surface to be lacquered should be cleaned properly beforehand using Cleaning thinner ZD 101. |
Special notes | The stated mixing ratios relate to volumetric hardening; exceptions are highlighted.This product must only be combined with other approved and technically suitable products when used as a flame-retardant coating for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 150 g/m².Its dull matt configuration means that UNA-PUR may not be used as a Multicoat lacquer, but only as a 1-coat finish! Our UNA-PUR Multicoat lacquer is ideally suited for finishing Hesse UNA-COLOR and produces outstanding metal marking resistance. UNA-COLOR DB 45245-(colour tone) can be used to tint UNA-PUR. Pre-priming is possible depending on surface requirements and substrate, for instance using Hesse Basecoats DG 434, DG 417, DG 468-1 and DG 4763. “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.