What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/UK
2C HYDRO PLANET-STONE basecoat clear HDM 54802-0901

2C HYDRO PLANET-STONE basecoat clear HDM 54802-0901

The 2C HYDRO basecoat PLANET-STONE HDM 54802-0901 is mixed with one of the PLANET-STONE stone powders and applied to a substrate. This creates a top coat with real stone, which is also visually and mechanically similar to solid stone. By choosing the PLANET-STONE stone powder, the color of the substrate, as well as the degree of sanding and the choice of finish coatings, different effects can be achieved, from rough to polished stone in different gloss levels from matt to high gloss.

Artikel anfragen
Highlights
  • real stone
  • much lighter than solid stone
  • sprayable
  • can be diluted with water
  • complies with German Industrial Standard 68861-1b
  • durable

Processing

  • 2C line
  • Airless Airless
  • Airless low pressure Airless low pressure
  • Airmix Airmix
  • Compressed air spraying Compressed air spraying
  • other treatment other treatment

Areas of application

Throughout interior/yacht construction, table and countertops, stairs and kitchen backsplashes.

Technical information

Technical Specifications

Proportion of renewable raw materials % 0 %
Appearance colourless
Decopaint base wb
Decopaint category J
VOC EU % 6 %
Number of layers (max) 2
Quantity per layers (min) 80 g/m²
Quantity per layers (max) 130 g/m²
Total quantity applied 260 g/m²
Mixing ratio (volumetric) 10 : 1
Mixing ratio (gravimetric) 100 : 11

Processing Instructions

Surface sanding (grain size) 220 - 320
Intermediate sanding (grain size)
Yield per pass m²/l
Processing information Add PLANET-STONE powder gravimetrically in a ratio of 60 parts powder to 40 parts basecoat. Stir the whole well. To ensure a homogenous material flow, the material should be diluted 5-10% with water.Since the different powders behave differently, you can vary the mixing ratio from 50 parts powder to 50 parts HYDRO basecoat to 80 parts powder to 20 parts HYDRO basecoat.Apply the mixture in several thin coats with short initial drying to avoid brayers until the desired appearance or substrate coverage is achieved.Alternative proceeding:The object can also be painted with the basecoat only and then turned while wet in a container of stone powder or sprinkled directly.Processing with Airmix, Airless or 2C line is only possible if the basecoat is painted without the PLANET-STONE powder.After complete hardening, the PLANET-STONE layer is covered with one or more coats of COOL-TOP HE 6509x(gloss level) within 24 hours, sanding between coats to achieve a certain smoothness/roughness. Here you can choose from a very rough to a smooth polished surface. The gloss level of the final coating is of course a deciding factor in the desired end effect.PLANET-STONE is a natural product and is subject to certain variations in colour tone. Therefore, sufficient material should be ordered for an object. Color deviations cannot be ruled out in the case of subsequent deliveries.
Special notes The preparation of the substrate, the mixture and processing of all base coats and stone powders, require special knowledge. Our responsible sales representatives will be pleased to advise you. Besides application for spraying, other application methods are also possible. Their application depends on the objects to be treated and the possibilities on site. Here, too, our field representative can advise you.

Procedure example

HYDRO PLANET-STONE Mercury

substrate: MDF sanded 180 - 280

Spray application: 1 x PERFECT-COLOR HDB 54342- in the desired color in mixing ratio (by volume): 10:1 with HYDRO Hardener HDR 5091

Drying: 4 hours RT 20 °C

Mixing ratio:

60 parts PLANET-STONE powder Mercury ZD 414340 parts 2K HYDRO PLANET-STONE basecoat clear HDM 54802-0901dilute with 5-10% waterPaint the mixture in several thin coats

Flow cup gun: Nozzle 5 mm, atomizing air 3 - 4 bar

Drying: At least 24 h / 20 °C

Sanding: According to desired roughness 150er grain

Coating: PERFECT-TOP HDE 5400x(Gloss level) in one or more coats with

Intermediate drying: 2 hours, depending on the desired smoothness the last two steps (sanding and varnishing) can be repeated several times

drying: min. 24 h / 20 °C

The coating process and the exact processing parameters are adapted in each case to the application and drying conditions and can be found in the customized surface Process descriptions (TdOs).

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.

Request article and material safety data sheet
2C HYDRO PLANET-STONE basecoat clear HDM 54802-0901

Request a series

2C HYDRO PLANET-STONE basecoat clear HDM 54802-0901?
Back to product overview