HYDRO-UV Pigment filler HUP 8850-9010

Hesse HYDRO-UV Pigment filler is a UV-activated product based on unsaturated acrylate binder. Our pigment filler for closed-pore lacquer finishes can be diluted with water and is ready-to-use. HUP 8850-9010 is particularly characterised by its high filling power and excellent tendency not to run.

Artikel anfragen

Highlights

good tendency not to run under high gloss
high filling power

Processing

Airmix
Automatic spray gun

Areas of application

For all interior fittings, including in heavily used areas such as kitchen and bathroom. On hardwood, MDF panels and panels with suitable paper or priming foils.

Page content

Technical information

Technical Specifications

Processing Instructions

Procedure example

Technical information

PDF

HYDRO-UV Pigment filler HUP 8850-9010 1 MB

Technical Specifications

Proportion of renewable raw materials %	0 %
Appearance	opaque
VOC EU %	0,3 %
Number of layers (max)	3
Quantity per layers (min)	120 g/m²
Quantity per layers (max)	150 g/m²
Total quantity applied	450 g/m²

Processing Instructions

Surface sanding (grain size)	220 - 400
Intermediate sanding (grain size)	280 - 400
Yield per pass	9 m²/l
Processing information	Working viscosity can be adjusted with water or HYDRO Optimizer HZ 70 (maximum 3 % by volume). For strip cleaning, we recommend the HYDRO Cleaner HY 6995 at a mixing ratio of 1 : 10 with water. Remove dried-on lacquer residues with special thinner ZD 82.HYDRO-PU Hardener HDR 5073 or HYDRO Hardener HDR 5081 can optionally be added subject to substrate. This involves 3 % of hardener (by weight) being stirred in. The mixture should subsequently be configured for working viscosity using 1 - 2 % HYDRO Optimizer HZ 70. The mixture’s pot life is at least 3 h / 20 °C.
Special notes	Always seal opened containers light-tight and air-tight to prevent skin forming. Remove dried lacquer residue using a sieve. Products in containers should be sieved before application.

Procedure example

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.