PU Isolating Filler DP 491-9343
DP 491-9343 is a Decopaint-compliant PUR Isolation primer for the best possible isolation effects and quality demands. This product is perfectly suited for use under Hesse high-gloss lacquers and in wet rooms. Our PUR Isolation primer can be used as an adhesion primer on a wide variety of plastics due to its excellent bonding properties.
Artikel anfragen- very good body and perfect sanding properties
- excellent ability to stay on vertical surfaces beneath high gloss
- extremely wide range of applications
- can be used as an adhesion primer for plastic
- Decopaint compliant
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
Areas of application
DP 491-9343 can be used as a PU Isolation primer for shopfitting and all interior fixtures and fittings, including in kitchens and bathrooms as well as the fitting out of ship interiors.
Page content
Technical information
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | opaque |
| VOC EU % | 34 % |
| Number of layers (max) | 4 |
| Quantity per layers (min) | 140 g/m² |
| Quantity per layers (max) | 300 g/m² |
| Total quantity applied | 800 g/m² |
| Mixing ratio (volumetric) | 4 : 1 |
| Mixing ratio (gravimetric) | 100 : 18 |
Processing Instructions
| Potlife | 2 h / 20 °C |
|---|---|
| Drying | 5 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 320 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | 5 - 10 m²/l |
| Processing information | One to four coat application at 100 - 300 g/m² on suitable substrates. The maximum total application amount is 800 g/m². The maximum total application amount when used as a flame-retardant coating for ocean-going vessels is 140 g/m². |
| Special notes | When being used as a flame-retardant coating agent for seagoing vessels in accordance with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120, this product may only be combined with other approved and technically suitable products.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU Isolating Filler DP 491-9343Your request for the series
PU Isolating Filler DP 491-9343
