Cherry tree wood surfaces with an antique effect simulating traces of use
Cherry tree wood surfaces with an antique effect simulating traces of use
Our Cherry tree antique effect involves a combination of different surface products. The use of Patina and Wiping stain with a special sanding technique enables this effect to simulate a piece of furniture that has aged over centuries. This special character is intensified by the simulated traces of use and wormholes.
Fields of application : Living room furniture, object furnishings in cherry tree wood, especially furniture made from solid wood.
How to – Cherry tree antique
Solid cherry dining table
- Solid cherry substrate material
- Use nails, chisels, etc. to introduce traces of use, wormholes, etc.
- Wood sanding 150 - 180 grit • 1 x staining without wiping using Precious wood stain BE 63-21997
- Dry for at least 3 h / 20 °C room temperature
- Apply 2 x MEGA-PUR Basecoat DG 417 / DG 4717-0005 with intermediate sanding between coats, mixing ratio 5 : 1 with Hardener DR 4070 + at least 10 % Thinner DV 4900
- Dry for at least 16 h / 20 °C room temperature
- Spray on 1 x HYDRO Wiping stain TW 4130-8022 and, once dried, use steel wool or fine sanding (for instance a sanding sponge) to remove it completely from the surface so that the HYDRO Wiping stain only remains in the small traces of use and the wood pores. Any HYDRO Wiping stain not removed from the surface could result in adhesion issues!
- Allow to dry for at least 2 h / 20 °C room temperature
- Effect sanding at 220 grit (optionally also coarser) along the texture
- Finish with 1 x UNA-PUR DE 559 / DE 42599 glossy, mixing ratio 10 : 1 with hardener DR 4070 and drying for at least 16 h / 20 °C room temperature