Versatile application options
Versatile application options
Description/ features: This finishing procedure replicates the effect of weathered softwood. The heavily structured solid wood effect of these surfaces makes them appear as if they had been exposed to decades of weathering.
Fields of application : furniture and interior fittings
How to – Weathered softwood
- Substrate material: solid spruce
- Use Andalon brushes to structure the surfaces several millimeters deep
- Spray on 1 x dark Hesse Antique stain WA 58-20506 to be uniformly moist
- Intermediate drying: 1 h / 20 °C
- Add a patina using antique stain WA 58-24510. Then accentuate the growth rings as flatly as possible using a cup gun with a small nozzle (1.2 mm) and reduced material flow. Do this by very carefully and uniformly applying the silvery antique stain to create a lovely light-dark effect.
- Intermediate drying: 3 h / 20 °C
- Prime with 1 x 100 – 120 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with Hardener DR 4071
- Intermediate drying 2 h / 20 °C
- Light smoothing with a sanding sponge
- Coat with 1 x 100 – 120 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with Hardener DR 4071
Technical information weathered softwood
Products required
Processing and safety information
Please observe the latest technical information and the material safety data sheets for the stated individual products.
Particular instructions
• Please conduct a test coating under real conditions. The effect can vary depending on the procedure used.
Further effects and other procedures for achieving weathered surfaces can be found on the Internet at www.hesse-lignal.de
• PU lacquers should not be used or dried at material or room temperatures below 18°C.
• PU-lacquered surfaces should be freshly sanded before the next coating is applied to avoid adhesion problems.
Note
This information is purely advisory and is based on the best knowledge available after careful research in line with current state of the art technology. It is not legally binding. We also refer you to our Terms and Conditions. The material safety data sheet according to regulation (EC) No. 1907/2006 is available on request.