What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/EN
PU Sun-Blocker DE 4295x(gloss level)

PU Sun-Blocker DE 4295x(gloss level)

The PU Sun-Blocker is a solvent-based two-component PU acrylic resin coating. The lightfast, scratch-resistant top coat is formulated with highly effective light stabilisers. It has good build properties and is ideal for natural wood finishes, on bleached woods or as a topcoat on solvent-based PU colour lacquers.

Enquire article
Highlights
  • formulated with highly effective light stabilisers
  • can be used on bleached wood
  • suitable for children's toys

Processing

  • 2K_Anlage
  • Airless
  • Airlessniederdruck
  • Airmix
  • Druckluftspritzen
  • Leistenspritzautomat
  • Spritzautomat
  • Spritzroboter
8%sustain­able
  • water 1%
  • renewable resources 4%
  • mineral resources 3%
  • fossil resources 92%

Areas of application

For all interior fittings, kitchens and bathrooms, furniture and children's toys where the highest standards of lightfastness are required.

Technical information

Technical Specifications

Appearance colourless
Number of layers (max) 3
Quantity per layers (min) 100 g/m²
Quantity per layers (max) 150 g/m²
Total quantity applied 450 g/m²
Mixing ratio (volumetric) 10 : 1 | Hardener: DR 4070
Mixing ratio (gravimetric) 100 : 11 | Hardener: DR 4070

Processing Instructions

Potlife 16 h / 20 °C
Drying 3 h / 20 °C
Due to hardening 7 d / 20 °C
Stackable according to 16 h / 20 °C
Surface sanding (grain size) 150 - 180
Intermediate sanding (grain size) 280 - 320
Yield per pass 6 - 9 m²/l
Processing information PUR Sun Blocker can be used if necessary to optimize chemical and mechanical resistance in a mixing ratio (volumetric) of 5 : 1 with DR 4070 and in a mixing ratio (volumetric) of 10 : 1 with DR 4071. Please note that in these hardening processes, drying takes longer than in the official hardening process in a mixing ratio (volumetric) of 10 : 1 with DR 4070.
Special notes Depending on the desired surface and substrate, PU Basecoat DG 4716-0001, PU Basecoat DG 4717-0005 or our NOVA-PUR Basecoat DG 4734 can also be used for pre-priming. PU Sun-Blocker is ideal for recoating on UNA-COLOR DB 45245-(colour tone) or UNA-THIX-COLOR DB 45205-(colour tone) or FANTASTIC-COLOR DB 48885-(colour tone) and provides excellent metal marking resistance.

Procedure example

Substrate: natural maple, semi matt

Wood-sanding: Grit 150 - 180 (dust removal)

Basecoat: 1 x 100 - 150 g/m² Hesse PU Sun-Blocker DE 42954, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070

Intermediate drying: at least 2 h / 20 °C

Intermediate sanding: 280 -320 grit (dust removal)

Top coat: 1 x 100 - 150 g/m² Hesse PU Sun-Blocker DE 42954, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070

Packable: after drying for at least 16 h / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.

Request article and material safety data sheet
PU Sun-Blocker DE 4295x(gloss level)

Request a series

PU Sun-Blocker DE 4295x(gloss level)?
Back to product overview