For perfect results on woods rich in active ingredients

Comparison of HYPERION TI 130 and COOL-PROTECT HI 6600-9343

The demands on modern wood coatings are continuously increasing: architects, designers, carpenters and painters not only expect flawless surfaces, but also sustainable, reliable and user-friendly products. Hesse Lignal offers the right solutions with its innovative water-based lacquer systems. The right primer is crucial for the success of the water-based surface, especially with light-coloured coatings on demanding woods. Two products stand out here:

HYPERION TI 130 and
COOL-PROTECT HI 6600-9343

Both were developed specifically for aqueous coating systems – and yet they serve very different requirements.

What exactly are the differences between these two insulating primers? When do you use which system?

Light-coloured, natural or pastel surfaces look elegant and light – but they pose a real technical challenge for water-based surface coatings, especially on tannin-rich woods such as Oak. Without a suitable primer, these woods tend to bleed through and discolour the surface unattractively.

HYPERION TI 130

The innovative all-rounder for natural and white tints

HYPERION TI 130

The innovative all-rounder for natural and white tints

This is where HYPERION TI 130 comes in. This innovative water-based primer has been specially developed to reliably prevent discolouration caused by wood contents. It forms a reliable barrier while preserving the natural wood structure, creating the ideal base for white or pastel water stains, coloured water-based coatings and even clear surface coatings. When used as a clear water-based coating on dark woods, HYPERION provides a subtle brightening effect.

HYPERION is particularly effective when used in combination with tannic oak woods, such as Oak: the wood is not only sealed, but its appearance is also preserved – a clear plus for high-quality interior fittings, furniture or design surfaces.

In addition, the primer is convincing due to its uncomplicated processing – whether sprayed or brushed, the application is quick, clean and efficient. A single application is sufficient to block the wood ingredients. The roughening of the wood is also noticeably reduced. Another advantage: intermediate sanding is not necessary, which further simplifies and accelerates the work process.

to hyperion

COOL-PROTECT HI 6600-9343

For smooth, coloured surfaces in white areas

COOL-PROTECT HI 6600-9343

For smooth, coloured surfaces in white areas

The requirements for light-coloured, coloured, closed-pore lacquer structures are quite different – especially on particularly demanding woods such as Hevea. Here, high powerfull filling and absolute insulating performance are essential to achieve a uniform, smooth surface without stains or penetrations.

Hesse COOL-PROTECT HI 6600-9343 was developed precisely for these requirements. This one component, water-based insulating filler provides a homogenous base and reliably blocks even stubborn substances. Its strong powerfull filling properties smooth the wood grain and create the ideal conditions for white or pastel top coats - perfect for closed-pore surface structures with the highest aesthetic demands.

COOL-PROTECT delivers convincing results, particularly with light-coloured, coloured furniture fronts, interior fittings or modern design elements, where colour effect and surface quality must go hand in hand: even, smooth and free from unsightly irregularities.

to cool-protect

Two solutions, one goal:

Perfect paintwork surfaces without discolouration

Product comparison	HYPERION TI 130	COOL-PROTECT HI 6600-9343
Structure	white/pastel and clear open- and closed pore	white/pastel and clear closed pore
Wood types	woods rich in active substances, e.g. Oak, Eucalyptus	demanding woods rich in active substances, e.g. Hevea
Colorfulness	stained, coloured or clear surface structure	coloured surface structure
Filling	-	*****
Sandability	not requied	***
Insulating effect	****	*****

Whether it's a radiant white stain on Oak or a rich mint green on Hevea, each surface has its own requirements.

With HYPERION TI 130 and COOL-PROTECT HI 6600-9343, Hesse offers two technically sophisticated insulating primers. They create the optimal basis for long-lasting, aesthetic and professional surfaces. Seek advice from your dealer or speak directly to the Hesse application engineers. Because every surface begins with the right foundation.

Contact

Waldemar
Harnos

DE | EN

Support Technical Hotline

+49 2381 963 846 Send E-Mail

Back to newsroom