COOL-TOP HE 6509x(gloss level)
Hesse COOL-TOP HE 6509x(gloss level) is a light fast and colourless 1C multicoat lacquer with very good chemical and mechanical resistance and good sanding properties. The product has a wide field of application and is suitable both for priming and top coating of open- to closed-pore structures, e.g. for coating staircases to be creak-free. Our acrylate-based COOL-TOP is equally suitable for coating children’s toys as per DIN EN 71-3 and its very low VOC content means it can also be used for "Green Building" projects.
Artikel anfragen- Solvents content < 3 %, thus also suitable for “Green Building” items.
- Flame retardant according to EN 13501-1 and IMO
- Non-slip class R10 per DIN 51130 (after addition of HZ 75)
Processing
Airless
Airmix
Compressed air spraying
Areas of application
In the entire interior and for coating furniture, stairs and handrails;usable on many different types of wood.
Page content
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Appearance | colourless |
|---|---|
| Decopaint base | wb |
| Decopaint category | I |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 360 g/m² |
Processing Instructions
| Drying | 2 h / 20 °C |
|---|---|
| Due to hardening | 1 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 120 - 220 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 9 m²/l |
| Processing information | This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 100 g/m². |
| Special notes | When being used on coarse-pored woods, the addition of up to 5 % of HYDRO Optimizer HZ 70 improves pore wetting and pore appearance. Over-paintability: possible with another coat of the same product or with suitable colourless materials. Also suitable as a top coat on coloured HYDRO coats. Recoating without intermediate sanding is only possible within 6 h (without forced drying). Non-slip factor R10 as per DIN 51130 is achieved by adding 10 % Hesse Additive HZ 75 to the final coat of lacquer. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
COOL-TOP HE 6509x(gloss level)Your request for the series
COOL-TOP HE 6509x(gloss level)
