What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/AE

Detail

FANTASTIC-COLOR Glass colour lacquer DB 4239x(gloss level)-(colour tone)

FANTASTIC-COLOR Glass colour lacquer DB 4239x(gloss level)-(colour tone)

PU Glass Colour lacquer DB 4239x(gloss level)-(colour tone) is formulated based on FANTASTIC-COLOR and after prior cleaning it can be applied directly onto glass. This high opacity product is available in virtually all colour tones.

Enquire article
Highlights
  • outstanding adhesion on glass
  • can be used for direct coating onto glass
  • high opacity
  • available in many different colour tones

Processing

  • 2C line
  • Airless Airless
  • Airless low pressure Airless low pressure
  • Airmix Airmix
  • Compressed air spraying Compressed air spraying
  • High-performance automatic spraying unit High-performance automatic spraying unit
  • Automatic spray gun Automatic spray gun
  • Spraying robot Spraying robot
24%sustain­able
  • renewable resources 1%
  • mineral resources 23%
  • fossil resources 76%

Areas of application

For high quality glass coating on interior fittings, in shop fitting and in the furniture industry, as well as rear glass coating in bathrooms to create back panels for showers.

Technical information

Technical Specifications

Appearance opaque
Number of layers (max) 2
Quantity per layers (min) 120 g/m²
Quantity per layers (max) 150 g/m²
Total quantity applied 300 g/m²
Mixing ratio (volumetric) 5 : 1 | Hardener: DR 4076-0001
Mixing ratio (gravimetric) 100 : 20 | Hardener: DR 4076-0001

Processing Instructions

Potlife 6 h / 20 °C
Drying 24 h / 20 °C
Due to hardening 7 d / 20 °C
Surface sanding (grain size)
Intermediate sanding (grain size)
Yield per pass m²/l
Special notes When painting on metal, if necessary, perform a test coating!

Procedure example

Glass partition wall, sand yellow as per colour tone RAL 1002

Surface preparation: carefully clean and remove grease from the glass using Cleaning thinner ZD 101

Coating: 1 x 130 - 150 g/m² FANTASTIC-COLOR Glass colour lacquer DB 42395-1002, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001, addition of 20 - 25 % PU Thinner DV 4900 in relation to the lacquer/hardener mixture

Packable: after at least 16 h / 20 °C

Mountable or bondable: after 7 d / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.

Request article and material safety data sheet
FANTASTIC-COLOR Glass colour lacquer DB 4239x(gloss level)-(colour tone)

Request a series

FANTASTIC-COLOR Glass colour lacquer DB 4239x(gloss level)-(colour tone)?
Back to product overview