Proterra NATURAL SOLID OIL GE 11254
Is a mixture of extremely low-solvent and low-odour high solid natural oils with excellent mechanical and chemical resistance. For low-emission surface finishes on exclusive wood surfaces subject to normal to high indoor demands. Easy to apply, fast drying and free from cobalt and lead-based siccatives. NATURAL-SOLID-OIL already exhibits good resistance and abrasion resistance in the first coat without hardener. The product can optionally be hardened for even faster drying and even better resistance. Apply once or twice using a spatula, roller or cloth and then rub it in and remove the excess. Our NATURAL-SOLID-OIL is so high-yielding that the wood is reliably protected by just one application of the hardened oil. This natural oil contains at least 94 % of renewable raw materials and only has a solvent content of less than 0.5 %. The oiled surfaces are suitable for contact with food of all kinds.
Artikel anfragen- fast-drying natural oil
- low-solvent, and thus pleasant smell
- antimicrobial effect according to ISO 22196:2007
- emission-certified construction product according to the DiBt (German Institute for Structural Engineering) principles
- low flammability tested according to IMO and DIN EN 13501-1
- suitable for surfaces in contact with food
- biodegradable
- Registered in the Baubook (Builders’ Journal)
Processing
Compressed air spraying
Gauze pads / cloth
Smooth roller
Rolling
Filling
Spreading
-
Wiping with a cloth
Areas of application
For parquet and surface coating. Surface treatment of woods in indoor areas, such as living rooms, bedrooms, children's furniture, wall and ceiling panelling. Suitable for coating children's toys. Low-flammable according to DIN EN 13501-1 and IMO-certified, so can be used for ship interior coating.
Page content
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 94,4 % |
|---|---|
| Appearance | colourless |
| Decopaint base | Lb |
| Decopaint category | F |
| VOC EU % | 0,9 % |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 10 g/m² |
| Quantity per layers (max) | 20 g/m² |
| Total quantity applied | 40 g/m² |
Processing Instructions
| Drying | 16 h / 20 °C |
|---|---|
| Due to hardening | 1 d / 20 °C |
| Stackable according to | 24 h / 20 °C |
| Surface sanding (grain size) | 120 - 320 |
| Intermediate sanding (grain size) | |
| Yield per pass | 48 - 96 m²/l |
| Processing information | In the furniture sector: Apply and rub in the product with a saturated fine sanding fleece. After a short exposure time, remove any excess with a cotton cloth. The surface should appear dry; if not, drying problems may occur. On parquet flooring: Apply the material with an appropriate trowel; after a short exposure time, work in evenly using the single-disc sander and white non-abrasive pad until the surface appears dry.Optional, additional sealing: Surfaces treated 2 x with the oil at a mixing ratio of 25 : 1 with OIL-HARDENER HIGH-SOLID OR 5188 can be sealed without sanding using Hesse HYDRO Seals (e.g. PURA-ONE HDE 51-(gloss level) or PURA-NATURA HDE 52-0) after drying over night at 20 °C room temperature with sufficient air circulation.If the oil surface is older than 16 h / 20 °C), it should be lightly sanded back (do not sand through it!) to achieve a good surface result.This additional sealing will influence the colour tone, feel and look of the surface. Please assess this based on a trial coating.This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 40 g/m². |
| Special notes | NATURAL-SOLID-OIL can be used as an accentuating and wood content blocking basecoat beneath special HYDRO-PU lacquers. Complete drying and the mechanical and chemical resistance of the surface will be increased by hardening at 100 : 4 with OR 5188. Pot life of the mixture: 1 hour at 20 °C room-temperature. The hardener contains isocyanate. Please observe safety instructions; see the safety data sheet. The material dries with oxidation – please observe the general application instructions. A skin can form on open containers due to the spontaneous reaction of the product with atmospheric oxygen! Please check before application! This skin cannot be incorporated, but must be carefully removed and disposed of before application. We recommend that you also sieve the material before applying it.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”For coating the insides of cupboards, we recommend Proterra Resit GE 17102 because of its low intrinsic smell. After suitable drying, can be re-coated with, for example, GZ 1020, GZ 1023. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
Proterra NATURAL SOLID OIL GE 11254Your request for the series
Proterra NATURAL SOLID OIL GE 11254
