PU Base Coat DG 4708-0015
Hesse PU Basecoat DG 4708-0015 is a two component PU Basecoat with a polyester resin basecoat. This well bodied product is configured to be highly thixotropic. The distinguishing feature of this basecoat is its powdery nature when sanded and it can be applied electrostatically, if required.
Enquire articlePage content
- Electrostatic coating is possible
- especially thixotropic
- Particularly good body
- sands well with industrial sanding machines
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
Electrostatic
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
- water 1%
- mineral resources 4%
- fossil resources 95%
Areas of application
This PU basecoat can be used for all interior fittings and for coatings in kitchens and bathrooms for a full to closed-pore surface ready for a suitable top coat.
Technical information
Sustainability data sheet
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| VOC EU % | 52,5 % |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 120 g/m² |
| Quantity per layers (max) | 180 g/m² |
| Total quantity applied | 360 g/m² |
| Mixing ratio (volumetric) | 2 : 1 | Hardener: DR 4035 |
| Mixing ratio (gravimetric) | 100 : 49 | Hardener: DR 4035 |
Processing Instructions
| Potlife | 2 h / 20 °C |
|---|---|
| Drying | 1,5 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 4 h / 20 °C |
| Surface sanding (grain size) | 150 - 180 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | 6 - 8 m²/l |
| Special notes | The product is not suitable for use on bleached surfaces! Greying may occur if multiple coats are applied or in the event of greater coat thicknesses on dark woods or stains. Our recommendation for these purposes: DG 4708-0003. Do not use the product on light woods or woods stained with non-wood stain colours! DG 4708-0015 is a suitable basecoat for electrostatic application with DU 4401x(gloss-level)-0003 as the top coat. The conductivity can be adjusted with NR 1075, as necessary. Add around 0.05 to 0.1 %. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU Base Coat DG 4708-0015Your request for the series
PU Base Coat DG 4708-0015
