PU Base Coat DG 4716-0001
DG 4716-0001 is a light fast base coat. This product has good body and is additionally formulated with high quality light stabilizers (sunblock properties) and thus perfectly suited as a primer for application on light wood varieties in combination with matching Hesse intermediate and finishing lacquers from dull matt to glossy. It can also be used on bleached woods . Our product meets the requirements of the Decopaint Directive when hardened with Hardener DR 4071. Certification to IMO is met when PU Hardener DR 4070 is used at a mixing ratio (by volume) of 2 : 1.
Enquire articlePage content
- An extraordinary degree of light fastness and light protection
- high solids content meaning 30 % less work
- resistant to peroxide so can be used on bleached woods
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
- renewable resources 24%
- mineral resources 1%
- fossil resources 75%
Areas of application
DG 4716-0001 can be used for shopfitting and all interior fixtures and fittings, including in kitchens and bathrooms as well as the fitting out of ship interiors.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 23,699 % |
|---|---|
| Appearance | colourless |
| VOC EU % | 45,7 % |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 180 g/m² |
| Total quantity applied | 500 g/m² |
| Mixing ratio (volumetric) | 2 : 1 | Hardener: DR 4070 |
| Mixing ratio (gravimetric) | 100 : 49 | Hardener: DR 4070 |
Processing Instructions
| Potlife | 3 h / 20 °C |
|---|---|
| Drying | 4 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 180 |
| Intermediate sanding (grain size) | 280 - 400 |
| Yield per pass | 6 - 10 m²/l |
| Special notes | “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 100 g/m². |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU Base Coat DG 4716-0001Your request for the series
PU Base Coat DG 4716-0001
