PU Multicoat lacquer DE 4532x(gloss level)
Two-component PU acrylate resin lacquer, clear, light fast and high-build. A coating lacquer for use as a primer and as a final coat. Highly resistant, particularly to mechanical strain Can be applied to bleached woods. Moreover, it is free from phthalate plasticisers, so that it is also suitable for coating children's toys.
Enquire articlePage content
- Light fast
- good body
- High mechanical resistance
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
- renewable resources 1%
- mineral resources 3%
- fossil resources 96%
Areas of application
For all interior fixtures and fittings and also suitable for brush and roller application. Can also be used as a thinner to seal the edges of MDF.
Technical information
Certificates
Technical Specifications
| Appearance | colourless |
|---|---|
| Number of layers (max) | 3 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 450 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: DR 4071 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: DR 4071 |
Processing Instructions
| Potlife | 8 h / 20 °C |
|---|---|
| Drying | 5 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | 150 - 180 |
| Intermediate sanding (grain size) | 240 - 320 |
| Yield per pass | 6 - 9 m²/l |
| Processing information | At a mixing ratio (by volume) 5 : 1 with PU Hardener DR 4071, then PU Multicoat lacquer DE 4503x(gloss level), with the addition of 30 % thinner, is suitable for applying lacquer to wenge. |
| Special notes | The dull matt formulation of this PU Multicoat lacquer means it must not be used as a build-up lacquer, but rather only as a single coating on top of the next higher degree of gloss in the same range or on appropriate primers. For use as MDF edge sealant beneath coloured coating systems, prepare the mixture with 20 - 30 % DV 4900 thinner and apply an additional coat on the same day following prior sanding with grit 320. This product can be used as a top coat on PU coloured lacquers in order to create an improved ring stain resistance. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU Multicoat lacquer DE 4532x(gloss level)Your request for the series
PU Multicoat lacquer DE 4532x(gloss level)
