to – Markotex effect PU-based application Substrate: textured softwood Apply 80 - 100 g/m² of Basecoat UNA-PUR DE 552, mixing ratio 10 : 1 with DR 4070 + 10 - 20 % Thinner DV 490 Allow to dry for 1 - 3 [...] sanding Prime with 80 - 100 g/m² of PU Glaze lacquer DB 1554-0614, mixing ratio 10 : 1 with DR 4070 + 10 % Thinner DV 490 Allow to dry for at least 16 h Use brushing to apply 1 x Wiping paste TW 130-9343 [...] 130-9343 Allow to dry for 2 - 3 h Use a hard block with 120 - 150 grit sanding to produce the effect Finish with 80 - 100 g/m² of PU Glaze lacquer DB 1554-0614, mixing ratio 10 : 1 with DR 4070 Allow to dry
g at 120 - 150 grit Apply 1 x 100 - 150 g/m² UNA-COLOR DB 45245-(colour tone), mixing ratio 10: 1 with PU Hardener DR 4070 and diluted with 20 - 30 % PU Thinner DV 4900 Allow to dry for 2 h / 20 °C • Smoothing [...] Smoothing (320 grit) Apply 1 x 100 - 150 g/m² UNA-Color DB 45245-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 20 - 30% PU Thinner DV 4900 Allow to dry for at least 16 h / 20 °C [...] 2: Finish with 1 x 70 - 100 g/m² PU Metallic Top coat DU 45457-99060, mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 10 % PU Thinner DV 4900 Allow to dry for at least 16 h / 20 °C Technical
effect. Intermediate drying: 3 h / 20 °C Prime with 1 x 100 – 120 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Intermediate drying 2 h / 20 °C Light smoothing with a [...] a sanding sponge Coat with 1 x 100 – 120 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Technical Information Weathered softwood to the technical info Products required [...] moist Intermediate drying: 1 h / 20 °C Add a patina using antique stain WA 58-24510. Then accentuate the growth rings as flatly as possible using a cup gun with a small nozzle (1.2 mm) and reduced material
charge. Link to the Sample shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
partner Diverse fields of application Diverse fields of application Description: Highly thixotropic 1C HYDRO Metallic colour lacquer with good ability not to sag on vertical surfaces and uniform effect [...] sample free of charge. To the shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
FR C A A+ B A+ - C Giscode Please select Ö10+ Ö20+ Ö40+ Ö40/DD+ Ö60 G1 G3 GE10 GE20 KH1 W1 W2 W2+ W3+ W3/DD+ 270 Results with your selection Sorting: alphabetically a - z alphabetically z - a This may take [...] AfPS GS 2014:01; Category 1 DIN 68861-Part 1B (Furniture surfaces; Behaviour under chemical demands) Non-slip class R10 per DIN 51130 Classification of fire behaviour under DIN EN 13501-1 on validated [...] plasticizers, formaldehyde, CMR substances in Categories 1A + 1B and volatile aromatic and halogenated organic compounds. DIN 68861-Part 1C (Furniture surfaces; Behaviour under chemical demands) PVC-resistant
technician "There are lots of people who work here and each of them has their own quite personal health history, even including handicaps." Gabriele Schangin & Steffen Martin Coating lab assistants "Made in Germany [...] Process innovation team "Our working from home arrangements give me great flexibility. My sons are really happy on the occasions when I can pick them up from school." Tim Lohrsträter & Patrick Heitkötter A [...] Application technology "Working with us is fun." Seher Dagci Logistics team member "Hesse offers us an extensive healthcare programme. Our company COVID-19 vaccination meant that my colleagues and I received
ATURA DA 48660 with intermediate sanding at 320 grit, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Dry for at least 16 h / 20 °C room temperature Technical Information Weathered Oak to the technical [...] Interior fittings and furniture How to – Weathered oak Substrate material: oak in solid wood or slip-matched veneer with a veneer thickness of at least 0.7 mm, preferably 1 mm deeply textured using an Andalon [...] for at least 3 h / 20 °C room temperature Sand using a 150 grit sanding sponge to produce an effect Spray on 1 x Antique stain WA 58-20504 nicely moist, with wiping Dry for at least 3 h / 20 °C room temperature
at least 3 h / 20 °C room temperature Apply 2 x FANTASTIC-NATURA DA 48660 with intermediate sanding at 320 grit, mixing ratio (by volume) 10 : 1 with Hardener DR 4071 Dry for at least 16 h / 20 °C room [...] furniture. How to – Darkly weathered pine Substrate material: pine, knotty pine, knotty spruce in solid wood or slip-matched veneer with a veneer thickness of at least 0.7 mm, preferably 1 mm deeply textured [...] 58-20500 Dry for at least 3 h / 20 °C room temperature Sand using a 150 grit sanding sponge to produce an effect with the hard growth rings exposed yet untreated Spray on 1 x Antique stain WA 58-20506 nicely
ratio (by volume) 4 : 1 with PU Hardener DR 4058 + 1 - 2 % Hesse PU Thixpaste ZD 3596 and 10 % DV 4991 in relation to the lacquer/ hardener mixture. Please mix all components in carefully. Drying: 3 - 5 min [...] ratio (by volume) 10 : 1 with PU Hardener DR 4070, adding 10 - 20 % Thinner DV 4900 to the lacquer/ hardener mixture. We recommend a dull matt gloss level for this metallic effect. Drying: 16 h / 20 C° [...] fittings. How to – Metallic finish Substrate material: Foil-coated MDF Edge and profile sanding: 150 - 180 grit (dust removal) Foil sanding: 320 - 400 grit (dust removal) Apply 150 - 300 g/m² Hesse PU
browser to understand. Current highlights Concrete effect Cool, urban or rustic – the concrete look in an industrial design "rocks" any environment. A combination with white, black or bare wood always presents [...] partner Only genuine samples can be convincing. Only genuine samples can be convincing. Be inspired – surfaces you can touch to help with the decision on your material. Are you looking for inspiring ideas [...] next day. Order your sample Contact partner Peter Haberkorn DE | EN Communication Product Marketing +49 2381 963 149 Send E-Mail
Make navigation easier for yourself Do you work as an architect/ planner ? Are you at home in a crafts trade or do you come from an industrial environment ? This is how you can quickly find all the co
coat of 100 - 150 g/m² UNA-PUR DE 55x(gloss level) mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070 Dry for at least 16 hours at 20 °C or apply two finishing coats of 100 - 120 g/m² FANTASTIC-BRILLANT [...] How to – Marble effect Step 1: Sand down priming foil, laminated chipboard or MDF surfaces well Prime with one coat of 150 - 200 g/m² FANTASTIC-FILL DP 4755-9343 mixing ratio (by volume) 10 : 1 with PU [...] colour tone mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070 thinned with 10 % PU Thinner DV 4900 Dry for at least 16 hours at 20 °C Sand until slightly smooth (grain 400) Step 2: Apply UNA-COLOR
for at least 3 h / 20 °C room temperature Apply 2 x MEGA-PUR Basecoat DG 417 / DG 4717-0005 with intermediate sanding between coats, mixing ratio 5 : 1 with Hardener DR 4070 + at least 10 % Thinner DV 4900 [...] for at least 2 h / 20 °C room temperature Effect sanding at 220 grit (optionally also coarser) along the texture Finish with 1 x UNA-PUR DE 559 / DE 42599 glossy, mixing ratio 10 : 1 with hardener DR 4070 [...] wood. How to – Cherry tree antique Solid cherry dining table Solid cherry substrate material Use nails, chisels, etc. to introduce traces of use, wormholes, etc. Wood sanding 150 - 180 grit • 1 x staining
apply 1 x an accent colour of at most 50 - 60 g/m² UNA-COLOR DB 45245-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 + 20 - 30 % PU Thinner DV 490 Allow to dry for 3 - 5 h Use 150 - 280 grit [...] with 15 % PU Thinner DV 490 Allow to dry for at least 16 h / 20 °C Intermediate sanding: 280 - 320 grit Apply 1 - 2 x 150 - 200 g/m² base tone UNA-COLOR DB 45245-(colour tone), mixing ratio 10: 1 with PU [...] the desired effect Apply 1 x 100 - 150 g/m² UNA-PUR DE 55x(gloss level) / DE 4259x(gloss level), mixing ratio 10 : 1 with PU Hardener DR 4070 Allow to dry for at least 16 h / 20 °C Technical Information
an Andalon brush Generously prime with 1 - 2 x FANTASTIC-FILL DP 4755-9343 with intermediate sanding, mixing ratio 10 : 1 with PU Hardener DR 4071 and diluted 1 : 1 with PU Thinner DV 490 Dry for at least [...] produced. Relief stain standard colours: WR 1001 terracotta, dark WR 1002 freesia blue WR 1003 freesia green WR 1004 terracotta, light WR 1005 anthracite WR 1006 grey beige PU lacquers should not be processed [...] e sanding grain 320, using FANTASTIC-NATURA DA 48660 mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 Dry for at least 16 h / 20 °C room temperature Technical Information Relief effect on softwood
Drying: 30 min / 20 °C Apply 60 - 100 g/m² Hesse PU Desert look DB 46031-1013, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 using a cup gun with reduced spray pressure (0.5 – 1.0 bar). The spray [...] ratio (by volume) 100 : 15 with PU Hardener DR 4096-0002, adding 10 % Thinner DV 4900 to the lacquer/ hardener mixture Drying: 5 h / 20 °C, preferably 16 h / 20 °C Filler sanding: 320 - 400 grit (dust removal) [...] Drying: 30 min / 20 °C Apply 60 - 100 g/m² Hesse PU Desert look DB 46031-8008, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 using a cup gun with reduced spray pressure (0.5 - 1.0 bar). The spray
of charge. Link to the selection Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
application options Metallic Messing. Versatile application options Description: Highly thixotropic 1C HYDRO Metallic colour lacquer with good ability not to sag on vertical surfaces and uniform effect [...] sample free of charge. Link to Shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
partner Versatile application options Versatile application options Description: Highly thixotropic 1C HYDRO Metallic colour lacquer with good ability not to sag on vertical surfaces and uniform effect [...] sample free of charge. To the shop Contact partner Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail
to solvent-based lacquers are Glaze lacquer concentrates ZD 1-01... ZD 1-23 and for aqueous systems they are concentrates HF 06515-01… HF 06515- 23. Available to download here IOS app Android app [...] sampler – easy and digital Available to download here It’s a handy replacement for the familiar glaze lacquer sampler – easy and digital It’s a handy replacement for the familiar glaze lacquer sampler – easy
491-9343, mixing ratio (by volume) 4 : 1 with PU Hardener DR 405 and diluted with 10 % PU Thinner DV 490 Allow to dry for at least 16 h / 20 °C Sand at 280 - 320 grit Apply 1 x 100 - 150g/m² UNA-COLOR DB [...] tone), mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 10 % PU Thinner DV 490 Allow to dry for 2 h / 20 °C and continue without intermediate sanding Uniformly apply 1 x water using a cup [...] side (cup gun with 1.2 - 1.5 mm nozzle) one side light the other side dark, so that the drops appear to be three-dimensional For example: one side with UNA-COLOR DB 45245-102 black Mixing ratio 1 : 5 with
100 - 120 g/m² UNA-COLOR Glass colour lacquer DB 42105-1013, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 and addition of 5 – 10 % Thinner DV 490 / DV 4900 to the lacquer/ hardener mixture [...] 100 - 120 g/m² UNA-COLOR Glass colour lacquer DB 42105-8004, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 and addition of 5 – 10 % Thinner DV 490 / DV 4900 to the lacquer/ hardener mixture [...] 46334-M0966, mixing ratio (by volume) 25 : 1 with PU Hardener DR 4076-0002 Intermediate drying: 15 - 30 min / 20 °C Use a gauze rag and light pressure to clean any spray mist from surfaces Top coat: 1 x 100
Foil sanding: 320 - 400 grit (dust removal) Basecoat: Apply 1 x 150 - 180 g/m² Hesse EASY-FILL DP 4788-9343, mixing ratio (by volume) 100 : 15 with PU Hardener DR 4096-0002, adding 10 % Thinner DV 4900 to [...] Drying: 5 h / 20 °C, preferably 16 h / 20 °C Filler sanding: 320 - 400 grit (dust removal) Colour lacquer coating: 1 x 120 - 140 g/m² Hesse FANTASTIC-COLOR DB 48885-7004, mixing ratio (by volume) 10 : 1 with [...] 4071, adding 15 - 25 % Thinner DV 4900 to the lacquer/ hardener mixture Allow to dry for 2 h / 20 °C Top coat: 1 x 130 - 160 g/m² Hesse PU SOFT-GRIP DU 44130, mixing ratio (by volume) 5 : 1 with PU Hardener
newsletter Category * Please choose Industry Craft E-mail * Please accept the privacy policy * Send * = required field Your point of contact Dirk Reckert DE | EN Sales Assistant CET +492381 963 192 Send E-Mail [...] one- or two-component water-based paints. But you will also find classic PUR lacquers in our range - for interior finishing, staircase construction and ship interior finishing. If there are specifications [...] E-Mail Waldemar Harnos DE | EN Support Technical Hotline +49 2381 963 846 Send E-Mail