according to the DiBt (German Institute for Structural Engineering) principles ■ ChemVOCFarbV (the “Decopaint Directive”) ■ LEED (Leadership in Energy and Environmental Design) ■ DGNB (German Sustainable Building [...] and parquet flooring. Moreover, it meets the requirements under DIN EN 71-3 (safety of toys) and DIN 53160 Parts 1 and 2 (saliva and sweat resistance) and can thus also provide reliable and long-lasting [...] Building Council) ■ BNB (Assessment System for Sustainable Building) ■ Dubai Green Buildings regulations PURA-NATURA O rd er n um be r: XF P N E I V er si on : J ul y 20 21 Hesse GmbH & Co. KG | Warendorfer
File type: application/pdf
Referenced at:
colour swatch books, which are only very rarely a 100% match with the standard colour tone. Therefore, they can only be used as an orientation aid. The „same“ NCS colour for different lacquer manufacturers [...] do not match even though they were ordered in the same colour tone. Or a lacquered part is not a 100% match with the selec- ted swatch on the colour chart. The resulting effects are shown on this image [...] to which the colours are formulated and The colourful world of colours and colour cards Hesse GmbH & Co. KG | Warendorfer Str. 21 | D-59075 Hamm | www.hesse-lignal.com If two objects need to have the same
File type: application/pdf
Referenced at:
Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: gloss resin solution EL 460-0028 Version: 27.05.21 1/1 Adding the gloss resin solution EL 460-0028 makes it possible [...] supplied gloss level 25, semi matt (300 µm on test card Chromolux 700 A neutral without hardener; 60° angle) • Mixture details for gloss level 40, silky gloss (300 µm on test card Chromolux 700 A neutral [...] angle) = DBM 45247-(colour tone): • 90 parts of UNA-COLOR DB 45245-(colour tone) • 10 parts of gloss resin solution EL 460-0028 Special instructions: • Mix the gloss resin solution well with the polyurethane
File type: application/pdf
Referenced at:
42634-(colour tone), DBM 46004-M0900 base, DBM 46014-M0999 base • PU Metallic top coat DU 45457-99060 (mother of pearl), - 99009 (fine), - 99012 (medium), - 99015 (coarse) • PU Multicolour effect lacquer [...] Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: glass lacquer additive EL 460-0025 Version: 02.09.21 1/1 Adding the glass lacquer additive EL 460-0025 to the co [...] Glass lacquer additive EL 460-0025 5% Hardener ratio of 5:1 with PUR Hardener DR 4076-0001 Additional mixing possibilities: BY adding 5 % glass lacquer additive EL 460-0025, further lacquers can be applied
File type: application/pdf
Referenced at:
level)-(colour tone) + EL 460-0030 → UNA-COLOR Pearl structure fine DB 42214-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4520x(gloss level)-(colour tone) + EL 460-0030 → UNA-THIX-COLOR [...] tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4888x(gloss level)-(colour tone) + EL 460-0030 → FANTASTIC-COLOR Pearl structure fine DB 42361-(colour tone), mixing ratio 10 : 1 with PU Hardener [...] n Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Structure additive fine EL 460-0030 Version: 28.03.22 1/1 Adding Structure additive EL 460-0030 to UNA-COLOR
File type: application/pdf
Referenced at:
the container with cleaning solution (75 % ZD 70 and 25 % water) and leave it to soak for around an hour. The specifications regarding the use of solvents (especially in technical equip- ment) must be followed [...] Technical information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Guide to the use of HYDRO paste systems Version: 24.05.22 1/2 Our pigment paste system has been [...] location with a tem- perature between 10 and 30 °C. • Protect the pigment pastes from direct sunlight, high temperatures and the influence of heat sources (heaters, etc.). • Protect the pigment pastes from
File type: application/pdf
Referenced at:
liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess. - Drying: 6 - 8 h / 20 °C room temperature After that again • 1 x WETPROTECT-OIL [...] dust removal • 1 x WETPROTECT-OIL OE 52068 liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess - Drying: 6 - 8 h / 20 °C room temperature [...] liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess until the entire surface appears uniformly dry - Drying: > 16 h / 20 °C with adequate
File type: application/pdf
Referenced at:
details: • 95.0 parts of the desired HYDRO Colour lacquer • 5.0 parts of the corresponding Pearl Structure paste This way modified colour lacquer should be additionally marked with “pearl effect”. Use: [...] Technical information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: HYDRO structuring pastes Status: 25 January 2023 1/1 Adding of different Structure pastes [...] to our terms and conditions of business. The Material Safety Data Sheet according to the regulation (EC) No. 1907/2006 is available.
File type: application/pdf
Referenced at:
plastic sponge. Drying: 3 to 6 hours at room temperature (20 °C) Post-staining • BH 59-21491 soft wood post-stain mixed ratio of 1 part wood stain + 10 parts water • Apply wood stain as described in a), b) [...] Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Wood stains: bleaching coniferous wood Status: 13.10.22 1/2 Description/properties: This particularly positive [...] ion. Depending on the treatment method, 1 litre is enough then for 50-80 m². Treatment: Wood preparation: • Sand down using 100-120 grit sandpaper (non-ferrous sandpaper) • Remove dust • If the wood is
File type: application/pdf
Referenced at:
ratio 5 : 1 with PU Hardener DR 4070 10 % thinned with PU Thinner DV 4900 • After drying, sand each coat with 320 grain • 2 x coats UNA PUR DE 554 mixture ratio 5 : 1 with PU Hardener DR 4070 10 % thinned [...] Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Coating: Coating birch and beech multiplex boards Version: 04.02.22 1/2 The coating of non-sealed multiplex [...] of the lacquer with humidity. As a result we recommend sealing with a suitable lacquer topcoat (0.5 - 0.7 mm thick). For specific reasons we are unable to give hard and fast recommendations regarding coating
File type: application/pdf
Referenced at:
• 1 x high gloss finish • Leave to dry at least overnight • 600 -1000 abrasive grain • 1 x high gloss finish • Leave to dry for at least 2 - 5 days depending on the product • or, better still, 2 - 3 [...] clear and coloured HYDRO (see separate technical information) Sanders: • Orbital sander, 2.5 to 5 mm lift, e.g. by Mirka, Festool, Metabo/Sander, 3M • Specialist abrasive 1,000 - 3,000th grain size, where necessary [...] to 4,000th grain size as well Polishing tools: • Hand polisher with electronic speed regulator of 700 - 2,000 revolutions/minute, e.g. from Fein, Mirca, Festool, Flex • With buffing wheel (Molton, lambskin
File type: application/pdf
Referenced at:
to spraying: - Compressed air spraying (cup gun) 3 - 4 bar spray pressure - 1.7 - 2 mm diameter jet - Airless spraying only for clear materials - 100 - 120 bar material pressure - 0.18 - 0.23 mm diameter [...] diameter jet - Air-assisted Airless for clear and coloured materials - 80 - 100 bar material pressure - 1 - 2 bar air pressure - 0.28 - 0.33 mm diameter jet - Please refer to the respective technical information [...] Order quantity: 80 - 100 g/m² - Standard values: - dust dry 15 - 30 minutes - sandable 2 -3 hours - touch dry - 6 - 8 hours depending on type of lacquer - resistant overnight - completely resilient after approx
File type: application/pdf
Referenced at:
glossy • 1 x 100 - 150 g/m² PU Basecoat DG 4717-0005 mixing ratio (by volume) 5 : 1 with PU Hardener DR 4070 Add 50 % DV 4955 to the lacquer/hardener mixture Drying: 15 - 20 min / 20 °C • 1 x 100 - 150 g/m² [...] ratio (by volume) 2 : 1 with PU Hardener DR 4035-0001 Add 20 - 25 % DV 4994 to the lacquer/hardener mixture Drying: 20 - 30 min / 20 °C • 1 x 150 - 200 g/m² PU Basecoat DG 4768-0004 mixing ratio (by volume) [...] volume) 2 : 1 with PU Hardener DR 4035-0001 Add 20 - 25 % DV 4994 to the lacquer/hardener mixture Drying: 20 - 30 min / 20 °C • 1 x 150 - 200 g/m² PU Basecoat DG 4768-0004 mixing ratio (by volume) 2 : 1 with
File type: application/pdf
Referenced at:
Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Wood stains: advice on wood stains and the most important staining rules Status: 24.09.21 1/2 Description/properties: [...] wood's properties (grain, etc.) • even/smooth out differences in the wood (opaque wood stains are better than bright shades) • hinder changes/distortions to the wood's colour (dark, opaque wood stains [...] coniferous wood. Remove the resin us- ing wood cleaner HBV 243 (dissolve 25 grams in 1 litre of hot water) or using a suitable washout solvent (solvent mixture). • Remove all dirt that is a result of grease and
File type: application/pdf
Referenced at:
natural effect: • 1 x UNA-PUR DE 550 mixture ratio 10 : 1 with PU Hardener DR 4070 • Leave to dry overnight. • Sand down lightly using 400 grit sandpaper • Then apply a thin coat of 1 x GE 100 Proterra CERA [...] lye used. - Premium BE 5 oak wood stain is suitable for staining the wood before adding wood lye to oak. - Once dry (approx. 3-4 hours) apply the wood lye as described under "apply wood lye". - Different [...] PUR varnish (only with a lightfast hardener). • Oils and other "acidic" systems are not suitable for coating the wood. For highly strict criteria: • 2 x UNA-PUR DE 550 mixture ratio 10 : 1 with PU Hardener
File type: application/pdf
Referenced at:
Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Staining: Smoking oak Version: 13.10.22 1/2 Products required: • Liquid ammonia BZ 840 / HBV 241 Description/features: [...] Rubber apron, gloves and safety goggles. Wood pre-treatment: • remove any sapwood • sand with grain 100 - 120 • remove dust Special instructions: • Apply a test coating following the complete procedure on [...] must be observed! Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Staining: Smoking oak Version: 13.10.22 2/2 Smoking: • The parts to be smoked are placed
File type: application/pdf
Referenced at:
ratio 10 : 1 with HDR 5091 + 10 % water • PUR finish DE 4500x(gloss level) mixing ratio 10 : 1 with DR 4070 + 10 % thinner or MULTI-PUR DE 45x(gloss level) mixing ratio 5 : 1 with DR 4070 + 30 % thinner [...] mixing ratio 10 : 1 with DR 4070 + 30 % thinner if necessary as well as mixing ratio 5 : 1 with DR 4070 + 30 % thinner or UNA-PUR DE 4259x(gloss level) mixing ratio 10 : 1 with DR 4070 + 30 % thinner, possibly [...] 4532x(gloss level)-0004 mixing ratio 5 : 1 with DR 4070 + 30 % thinner • or as equalising version: PUR finish, lightening with light stabiliser DA 408-0 mixing ratio 10 : 1 with DR 4070 + 20 % thinner On bleached
File type: application/pdf
Referenced at:
tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4520x(gloss level)-(colour tone) + EL 460-0045 → UNA-THIX-COLOR Pearl structure very fine DB 46181-(colour tone), mixing ratio 10 : 1 with PU Hardener [...] Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Structure additive very fine EL 460-0045 Status: 11.04.22 1/1 Adding Structure additive EL 460-0045 to UNA-COLOR [...] tone) + EL 460-0045 → FANTASTIC-COLOR Pearl structure very fine DB 42381-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4071 Special instructions: • Stir Structure additive EL 460-0045 thoroughly
File type: application/pdf
Referenced at:
ratio 5 : 1 with HYDRO Hardener HDR 5091and PERFECT-TOP HDE 5400x(gloss level), mixing ratio 10 : 1 with HYDRO Hardener HDR 5091 Or as already mentioned: UNA PUR DE 42594,mixing ratio 10 : 1 with PU Hardener [...] solvent-based lacquer system (surface on the right) and a HYDRO Lacquer system (surface on the left). Beech wood (no dyestuffs/ substances): no difference discernible. Ash wood (little to lots of dyestuffs/ [...] Technical information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Coating: Recoating of HYDRO Stains with water-based lacquers Version: 09.02.23 1/3 You should be aware of the
File type: application/pdf
Referenced at:
level)-(colour tone) + EL 460-0029 → UNA-COLOR Pearl structure coarse DB 45822-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4520(gloss level)-(colour tone) + EL 460-0029 → UNA-THIX-COLOR [...] tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4888(gloss level)-(colour tone) + EL 460-0029 → FANTASTIC-COLOR Pearl structure coarse DB 42301-(colour tone), mixing ratio 10 : 1 with PU Hardener [...] Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Structure additive coarse EL 460-0029 Version: 19.01.22 1/1 Adding Structure additive EL 460-0029 to UNA-COLOR
File type: application/pdf
Referenced at:
Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: PU Additive for resistance to metallic rings EL 460-0046 Version: 21.04.22 1/1 Adding PU Additive for [...] . Mixture details: • 85.0 parts UNA-COLOR DB 45245-(colour tone) or UNA-THIX-COLOR DB 45205- (colour tone) • 15.0 parts PU Additive for resistance to metallic rings EL 460-0046 For the sake of clarity [...] ring proof DB 45975-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070. Use: • Stir PU Additive for resistance to metallic rings EL 460-0046 thoroughly before use and mix well with the coloured
File type: application/pdf
Referenced at:
r tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4520x(gloss level)-(colour tone) + ZD 3596 → UNA-THIX-COLOR Spatter Effect DB 42934-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 [...] information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Paint Express - Spatter Effect with PUR Thixpaste ZD 3596 Version: 14.01.22 1/1 Adding PU Thixpaste ZD [...] and FANTASTIC-COLOR DB 4888x(gloss level)- (colour tone) produces a tangible, spattered surface structure when applied at a reduced spray pressure (0.5 - 1.0 bar). Outstanding visual effects are achieved
File type: application/pdf
Referenced at:
Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Brushing additive EL 460-0048 Version: 21.06.21 1/1 Adding the Brushing additive EL 460-0048 to the normal UNA-COLOR [...] • 85.0 parts UNA-COLOR DB 45245-(colour tone), or PU Insulating filler DP 491-(colour tone) • 15.0 parts Brushing additive EL 460-0048 Special instructions: • Mix the Brushing additive EL 460-0048 well [...] to our terms and conditions of business. The Material Safety Data Sheet according to the regulation (EC) No. 1907/2006 is available.
File type: application/pdf
Referenced at:
Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Structure additives EL 460-0043 and EL 460-0044 Status: 02.02.22 1/1 Adding Structure additive EL 460-0043 to our UNA-COLOR [...] 460-0044. Adding EL 460-0043 and EL 460-0044 creates a pleasant and interesting feel and visual effect. Mixture details: • 90.0 parts PU Colour lacquer • 10.0 parts Structure additive EL 460-0043 or EL [...] tone), mixing ratio 5 : 1 with PU Hardener DR 4070 • DB 4520x(gloss level)-(colour tone) + EL 460-0044 → UNA-THIX-COLOR Pearl structure medium DB 45851-(colour tone), mixing ratio 10 : 1 with PU Hardener DR
File type: application/pdf
Referenced at:
wet-on-wet coats of 120 - 200 g/m² PU Isolating primer DG 572-1 (20 minutes intermediate drying) mixing ratio (by volume) 2 : 1 with PU Hardener DR 440 + if necessary 5 – 10 % PU Thinner DV 4994, depending [...] te drying) using PU Isolating primer DG 572-1 + addition of 4 % SUN-EX ZD 9501 Mixing ratio (by volume) 2 : 1 with PU Hardener DR 440 + potentially 5 – 10 % PU Thinner DV 4994, depending on the lacque [...] 438 20 - 30 % PU Thinner DV 4935 (winter) or DV 4981 (summer), depending on the lac- quer/hardener mixture • Dry for 16 - 20 hours / 320 grit sanding • 3 x 150 - 200 g/m² wet-in-wet priming (30 minutes
File type: application/pdf
Referenced at: