forward to hearing from you. www.hesse-lignal.com Hesse GmbH & Co. KG Warendorfer Straße 21 D-59075 Hamm Phone: +49 2381 963-00 Fax: +49 2381 963 - 849 info@hesse-lignal.de [...] targeted manner. | S. 01 | S. 02 An overview of the individual Quick Check phases is set out below: PH A SE 1 2 3 4/5 6 7 8 Customer/ interested party Onboarding Onboarding complete 1. Requirements management [...] participant. JOINT ELABORATION OF THE REQUIREMENTS AND SPECIFICATIONS 1 2 Requirements management Quick Check Phase Phase | S. 03 | S. 04 3 4 Reality check Development Phase Phase REVIEWING MULTIPLE ASPECTS
File type: application/pdf
Referenced at:
systems at a single spray booth or spray stand! Please also observe DGUV Rule 100-500 (previously BGR 500) Section 2.29 (Processing of coating materials) paragraph 3.12 5. Only use clean, non-flammable filter [...] information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm, Germany www.hesse-lignal.de Coating: processing recommendations for oil products Version: 13 December 2023 1/2 General recommendations [...] information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm, Germany www.hesse-lignal.de Coating: processing recommendations for oil products Version: 13 December 2023 2/2 10. After sufficient drying
File type: application/pdf
Referenced at:
Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: gloss resin solution EL 460-0028 Version: 27.05.21 1/1 Adding the gloss resin solution EL 460-0028 makes it possible [...] supplied gloss level 25, semi matt (300 µm on test card Chromolux 700 A neutral without hardener; 60° angle) • Mixture details for gloss level 40, silky gloss (300 µm on test card Chromolux 700 A neutral [...] angle) = DBM 45247-(colour tone): • 90 parts of UNA-COLOR DB 45245-(colour tone) • 10 parts of gloss resin solution EL 460-0028 Special instructions: • Mix the gloss resin solution well with the polyurethane
File type: application/pdf
Referenced at:
42634-(colour tone), DBM 46004-M0900 base, DBM 46014-M0999 base • PU Metallic top coat DU 45457-99060 (mother of pearl), - 99009 (fine), - 99012 (medium), - 99015 (coarse) • PU Multicolour effect lacquer [...] Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: glass lacquer additive EL 460-0025 Version: 02.09.21 1/1 Adding the glass lacquer additive EL 460-0025 to the co [...] Glass lacquer additive EL 460-0025 5% Hardener ratio of 5:1 with PUR Hardener DR 4076-0001 Additional mixing possibilities: BY adding 5 % glass lacquer additive EL 460-0025, further lacquers can be applied
File type: application/pdf
Referenced at:
level)-(colour tone) + EL 460-0030 → UNA-COLOR Pearl structure fine DB 42214-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4520x(gloss level)-(colour tone) + EL 460-0030 → UNA-THIX-COLOR [...] tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4888x(gloss level)-(colour tone) + EL 460-0030 → FANTASTIC-COLOR Pearl structure fine DB 42361-(colour tone), mixing ratio 10 : 1 with PU Hardener [...] n Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Structure additive fine EL 460-0030 Version: 28.03.22 1/1 Adding Structure additive EL 460-0030 to UNA-COLOR
File type: application/pdf
Referenced at:
the container with cleaning solution (75 % ZD 70 and 25 % water) and leave it to soak for around an hour. The specifications regarding the use of solvents (especially in technical equip- ment) must be followed [...] Technical information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Guide to the use of HYDRO paste systems Version: 24.05.22 1/2 Our pigment paste system has been [...] location with a tem- perature between 10 and 30 °C. • Protect the pigment pastes from direct sunlight, high temperatures and the influence of heat sources (heaters, etc.). • Protect the pigment pastes from
File type: application/pdf
Referenced at:
liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess. - Drying: 6 - 8 h / 20 °C room temperature After that again • 1 x WETPROTECT-OIL [...] dust removal • 1 x WETPROTECT-OIL OE 52068 liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess - Drying: 6 - 8 h / 20 °C room temperature [...] liberally applied - Allow the oil to penetrate for 5 - 10 min then use a cotton cloth to rub it in and remove any excess until the entire surface appears uniformly dry - Drying: > 16 h / 20 °C with adequate
File type: application/pdf
Referenced at:
details: • 95.0 parts of the desired HYDRO Colour lacquer • 5.0 parts of the corresponding Pearl Structure paste This way modified colour lacquer should be additionally marked with “pearl effect”. Use: [...] Technical information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: HYDRO structuring pastes Status: 25 January 2023 1/1 Adding of different Structure pastes [...] to our terms and conditions of business. The Material Safety Data Sheet according to the regulation (EC) No. 1907/2006 is available.
File type: application/pdf
Referenced at:
45002 - DE 45007 Mixing ratio 10 : 1 with PU Hardener DR 4070 + 5 - 10 % PU Thinner DV 4900 • MULTI-PUR DE 45322-0004 - DE 45327-0004 / DE 452 - DE 457 Mixing ratio 5 : 1 with PU Hardener DR 4070 + 10 - 15 [...] 48777 Mixing ratio 10 : 1 with PU Hardener DR 4071 + 15 - 20 % PU Thinner DV 4900 • UNA-PUR DE 42592 - DE 42597 / DE 552 - DE 557 Mixing ratio 5 : 1 with PU Hardener DR 4070 + 15 - 20 % PU Thinner DV 4900 [...] DR 4070 + 20 - 30 % PU Thinner DV 4900 • PU Isolating primer DG 4720-0001 / DG 572 Mixing ratio 2 : 1 with PU Hardener DR 4040 / DR 440 + 15 - 20 % PU Thinner DV 4900 • FANTASTIC-CLEAR DE 48772 - DE 48777
File type: application/pdf
Referenced at:
ratio (by volume) 1 : 1 with PU Hardener DR 4091, addition of 10 - 30 % Special thinner DV 4905 • Intermediate drying 20 - 30 min / 20 °C • 1 x 180 - 250 g/m² ADAMANT DU 48999, mixing ratio (by volume) [...] volume) 1 : 1 with PU Hardener DR 4091, addition of 10 - 30 % Special thinner DV 4905 Can be polished after > 16 h / 20 °C, Packable after 48 h / 20 °C or • 1 x 90 - 100 g/m² FANTASTIC-BRILLANT DU 48799, mixing [...] addition of 10 - 15 % Thinner DV 4935 to the lacquer/hardener mixture • Drying: > 2 h / 20 °C, preferably 16 h / 20 °C • Primer sanding: 320 - 400 grit (dust removal) • Basecoat: • 1 x 150 - 200 g/m² F
File type: application/pdf
Referenced at:
wet-on-wet coats of 120 - 200 g/m² PU Isolating primer DG 572-1 (20 minutes intermediate drying) mixing ratio (by volume) 2 : 1 with PU Hardener DR 440 + if necessary 5 – 10 % PU Thinner DV 4994, depending [...] te drying) using PU Isolating primer DG 572-1 + addition of 4 % SUN-EX ZD 9501 Mixing ratio (by volume) 2 : 1 with PU Hardener DR 440 + potentially 5 – 10 % PU Thinner DV 4994, depending on the lacque [...] 438 20 - 30 % PU Thinner DV 4935 (winter) or DV 4981 (summer), depending on the lac- quer/hardener mixture • Dry for 16 - 20 hours / 320 grit sanding • 3 x 150 - 200 g/m² wet-in-wet priming (30 minutes
File type: application/pdf
Referenced at:
ratio 5 : 1 with PU Hardener DR 4070 10 % thinned with PU Thinner DV 4900 • After drying, sand each coat with 320 grain • 2 x coats UNA PUR DE 554 mixture ratio 5 : 1 with PU Hardener DR 4070 10 % thinned [...] Technical Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Coating: Coating birch and beech multiplex boards Version: 04.02.22 1/2 The coating of non-sealed multiplex [...] of the lacquer with humidity. As a result we recommend sealing with a suitable lacquer topcoat (0.5 - 0.7 mm thick). For specific reasons we are unable to give hard and fast recommendations regarding coating
File type: application/pdf
Referenced at:
• 1 x high gloss finish • Leave to dry at least overnight • 600 -1000 abrasive grain • 1 x high gloss finish • Leave to dry for at least 2 - 5 days depending on the product • or, better still, 2 - 3 [...] clear and coloured HYDRO (see separate technical information) Sanders: • Orbital sander, 2.5 to 5 mm lift, e.g. by Mirka, Festool, Metabo/Sander, 3M • Specialist abrasive 1,000 - 3,000th grain size, where necessary [...] to 4,000th grain size as well Polishing tools: • Hand polisher with electronic speed regulator of 700 - 2,000 revolutions/minute, e.g. from Fein, Mirca, Festool, Flex • With buffing wheel (Molton, lambskin
File type: application/pdf
Referenced at:
to spraying: - Compressed air spraying (cup gun) 3 - 4 bar spray pressure - 1.7 - 2 mm diameter jet - Airless spraying only for clear materials - 100 - 120 bar material pressure - 0.18 - 0.23 mm diameter [...] diameter jet - Air-assisted Airless for clear and coloured materials - 80 - 100 bar material pressure - 1 - 2 bar air pressure - 0.28 - 0.33 mm diameter jet - Please refer to the respective technical information [...] Order quantity: 80 - 100 g/m² - Standard values: - dust dry 15 - 30 minutes - sandable 2 -3 hours - touch dry - 6 - 8 hours depending on type of lacquer - resistant overnight - completely resilient after approx
File type: application/pdf
Referenced at:
drying: 20 - 40 min / 20 °C • 1 x 100 - 120 g/m² FANTASTIC-BRILLANT DU 48799, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, addition of 20 - 30 % Thinner DV 4935 to the lacquer/hardener mixture [...] two coats, of 100 - 150 g/m² UNA-COLOR DB 45245-(colour tone) mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 thinned if necessary and depending on the spraying unit with 5 - 20 % DV 4900 or PU [...] gloss: • 1 x 90 - 100 g/m² FANTASTIC-BRILLANT DU 48799, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, addition of 20 - 30 % Thinner DV 4935 to the lacquer/hardener mixture • Intermediate drying:
File type: application/pdf
Referenced at:
glossy • 1 x 100 - 150 g/m² PU Basecoat DG 4717-0005 mixing ratio (by volume) 5 : 1 with PU Hardener DR 4070 Add 50 % DV 4955 to the lacquer/hardener mixture Drying: 15 - 20 min / 20 °C • 1 x 100 - 150 g/m² [...] ratio (by volume) 2 : 1 with PU Hardener DR 4035-0001 Add 20 - 25 % DV 4994 to the lacquer/hardener mixture Drying: 20 - 30 min / 20 °C • 1 x 150 - 200 g/m² PU Basecoat DG 4768-0004 mixing ratio (by volume) [...] volume) 2 : 1 with PU Hardener DR 4035-0001 Add 20 - 25 % DV 4994 to the lacquer/hardener mixture Drying: 20 - 30 min / 20 °C • 1 x 150 - 200 g/m² PU Basecoat DG 4768-0004 mixing ratio (by volume) 2 : 1 with
File type: application/pdf
Referenced at:
Intermediate drying: 20 - 40 min / 20 °C • 1 x 100 - 120 g/m² FANTASTIC-BRILLANT DU 48799 + 4 % SUN-EX ZD 9501, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, addition of 10 - 20 % PU Thinner DV 4935 [...] sanding with grain 400 / 600. High gloss: • 1 x 90 - 100 g/m² FANTASTIC-BRILLANT DU 48799 + 4 % SUN-EX ZD 9501, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071, addition of 20 - 30 % PU Thinner DV 4935 [...] Primer DG 417 (20 - 30 minutes intermediate drying) + 4 % SUN-EX ZD 9501 light-stabilising concentrate, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4070, with addition of 10 - 20 % PU Thinner DV
File type: application/pdf
Referenced at:
surfaces (220 - 280 grit) • Subject to substrate material - 1 x basecoat of 150 - 200 g/m² PU Isolating filler DP 4791-9343, mixing ratio (by volume) 4 : 1 with PU Hardener DR 4058, add 10 - 20 % Thinner [...] 5 hours, then use 400 - 600 grit to lightly smooth • 1 x 100 – 120 g/m² Hesse ADAMANT DU 48999, mixing ratio (by volume) 1 : 1 with PU Hardener DR 4091, as necessary add 10 – 30 % Thinner DV 4905 in relation [...] quer/hardener mixture • Drying: 20 - 30 min / 20 °C • 1 x 150 – 250 g/m² Hesse ADAMANT DU 48999, mixing ratio (by volume) 1 : 1 with PU Hardener DR 4091, as necessary add 10 – 30 % Thinner DV 4905 in relation
File type: application/pdf
Referenced at:
ratio 10 : 1 with HDR 5091 + 10 % water • PUR finish DE 4500x(gloss level) mixing ratio 10 : 1 with DR 4070 + 10 % thinner or MULTI-PUR DE 45x(gloss level) mixing ratio 5 : 1 with DR 4070 + 30 % thinner [...] mixing ratio 10 : 1 with DR 4070 + 30 % thinner if necessary as well as mixing ratio 5 : 1 with DR 4070 + 30 % thinner or UNA-PUR DE 4259x(gloss level) mixing ratio 10 : 1 with DR 4070 + 30 % thinner, possibly [...] 4532x(gloss level)-0004 mixing ratio 5 : 1 with DR 4070 + 30 % thinner • or as equalising version: PUR finish, lightening with light stabiliser DA 408-0 mixing ratio 10 : 1 with DR 4070 + 20 % thinner On bleached
File type: application/pdf
Referenced at:
tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4520x(gloss level)-(colour tone) + EL 460-0045 → UNA-THIX-COLOR Pearl structure very fine DB 46181-(colour tone), mixing ratio 10 : 1 with PU Hardener [...] Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Structure additive very fine EL 460-0045 Status: 11.04.22 1/1 Adding Structure additive EL 460-0045 to UNA-COLOR [...] tone) + EL 460-0045 → FANTASTIC-COLOR Pearl structure very fine DB 42381-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4071 Special instructions: • Stir Structure additive EL 460-0045 thoroughly
File type: application/pdf
Referenced at:
ratio 5 : 1 with HYDRO Hardener HDR 5091and PERFECT-TOP HDE 5400x(gloss level), mixing ratio 10 : 1 with HYDRO Hardener HDR 5091 Or as already mentioned: UNA PUR DE 42594,mixing ratio 10 : 1 with PU Hardener [...] solvent-based lacquer system (surface on the right) and a HYDRO Lacquer system (surface on the left). Beech wood (no dyestuffs/ substances): no difference discernible. Ash wood (little to lots of dyestuffs/ [...] Technical information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Coating: Recoating of HYDRO Stains with water-based lacquers Version: 09.02.23 1/3 You should be aware of the
File type: application/pdf
Referenced at:
level)-(colour tone) + EL 460-0029 → UNA-COLOR Pearl structure coarse DB 45822-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4520(gloss level)-(colour tone) + EL 460-0029 → UNA-THIX-COLOR [...] tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4888(gloss level)-(colour tone) + EL 460-0029 → FANTASTIC-COLOR Pearl structure coarse DB 42301-(colour tone), mixing ratio 10 : 1 with PU Hardener [...] Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Structure additive coarse EL 460-0029 Version: 19.01.22 1/1 Adding Structure additive EL 460-0029 to UNA-COLOR
File type: application/pdf
Referenced at:
Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: PU Additive for resistance to metallic rings EL 460-0046 Version: 21.04.22 1/1 Adding PU Additive for [...] . Mixture details: • 85.0 parts UNA-COLOR DB 45245-(colour tone) or UNA-THIX-COLOR DB 45205- (colour tone) • 15.0 parts PU Additive for resistance to metallic rings EL 460-0046 For the sake of clarity [...] ring proof DB 45975-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070. Use: • Stir PU Additive for resistance to metallic rings EL 460-0046 thoroughly before use and mix well with the coloured
File type: application/pdf
Referenced at:
r tone), mixing ratio 10 : 1 with PU Hardener DR 4070 • DB 4520x(gloss level)-(colour tone) + ZD 3596 → UNA-THIX-COLOR Spatter Effect DB 42934-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 [...] information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Paint Express - Spatter Effect with PUR Thixpaste ZD 3596 Version: 14.01.22 1/1 Adding PU Thixpaste ZD [...] and FANTASTIC-COLOR DB 4888x(gloss level)- (colour tone) produces a tangible, spattered surface structure when applied at a reduced spray pressure (0.5 - 1.0 bar). Outstanding visual effects are achieved
File type: application/pdf
Referenced at:
Information Hesse GmbH & Co. KG, Warendorfer Str. 21, D 59075 Hamm www.hesse-lignal.de Paint Express: Brushing additive EL 460-0048 Version: 21.06.21 1/1 Adding the Brushing additive EL 460-0048 to the normal UNA-COLOR [...] • 85.0 parts UNA-COLOR DB 45245-(colour tone), or PU Insulating filler DP 491-(colour tone) • 15.0 parts Brushing additive EL 460-0048 Special instructions: • Mix the Brushing additive EL 460-0048 well [...] to our terms and conditions of business. The Material Safety Data Sheet according to the regulation (EC) No. 1907/2006 is available.
File type: application/pdf
Referenced at: