Mother-of-pearl effect

Application example: Step 1:

• Possible substrate materials include veneered woods or solid wood, such as ash for open-pored applications.
• Brush out well with wood-sanding at 120 - 150 grit
• Apply 1 x 100 - 150 g/m² UNA-COLOR DB 45245-(colour tone), mixing ratio 10: 1 with PU Hardener DR 4070 and diluted with 20 - 30 % PU Thinner DV 4900
• Allow to dry for 2 h / 20 °C • Smoothing (320 grit)
• Apply 1 x 100 - 150 g/m² UNA-Color DB 45245-(colour tone), mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 20 - 30% PU Thinner DV 4900
• Allow to dry for at least 16 h / 20 °C
• Smooth lightly at 400 grit 

Step 2:

•  Finish with 1 x 70 - 100 g/m² PU Metallic Top coat DU 45457-99060, mixing ratio 10 : 1 with PU Hardener DR 4070 and diluted with 10 % PU Thinner DV 4900
• Allow to dry for at least 16 h / 20 °C

• The mother-of-pearl effect can only be achieved on pastel tones.
• Please apply Pearl lacquer uniformly; different coat thicknesses change the colour tone and excessively high application quantities result in clouding.
• Our PU Pearl lacquer DU 457-99060 can be mixed with 5 - 10% UNA-COLOR DB 555-(colour tone) to obtain individual colour tones.
• The lacquer is then applied similar to a Multicoat lacquer; as a basecoat and top coat.
• Stir well before use!
• PU lacquers should not be processed and dried at material/room temperatures below 18 °C.
• PU lacquered surfaces should be freshly sanded before applying the finish coat to avoid adhesion problems.
• Please conduct a test coating.