COLOR-SOLID-OIL GB 1125x(gloss level)-(colour tone)
Coloured, extremely low-solvent and low-odour HIGH-SOLID natural oil with outstanding mechanical and chemical resistance. For coloured surface coating of exclusive indoor wood surfaces with normal to high use. Easy to apply, fast drying and with cobalt- and lead-free siccatives. Can be optionally hardened for even faster drying and even better resistance. One to two applications using a spatula, roller or cloth and subsequent rubbing in with removal of the excess.
Artikel anfragen- Quick-drying natural oil
- Low-solvent, so a pleasant odour
- Good chemical resistance
- with IMO approval
Processing
Compressed air spraying
Gauze pads / cloth
Rolling
Spreading
-
Wiping with a cloth
Filling
Areas of application
Furniture, parquet surfaces and stair treads with normal to high interior use. Certified according to IMO so it can be applied on ship interiors
Page content
Technical information
Technical Specifications
| Appearance | glazing |
|---|---|
| Decopaint base | Lb |
| Decopaint category | J |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 10 g/m² |
| Quantity per layers (max) | 15 g/m² |
| Total quantity applied | 30 g/m² |
Processing Instructions
| Drying | 16 h / 20 °C |
|---|---|
| Due to hardening | 24 d / 20 °C |
| Stackable according to | 24 h / 20 °C |
| Surface sanding (grain size) | 120 - 320 |
| Intermediate sanding (grain size) | |
| Yield per pass | 73 - 110 m²/l |
| Processing information | In the furniture sector: Apply and rub in the product with a saturated fine sanding fleece. After a short exposure time, remove any excess with a cotton cloth. The surface should appear dry; if not, drying problems may occur. In special cases the material can also be thinly applied by spraying. Rubbing in and subsequent removal of the excess are as for manual application. The corresponding safety instructions for spray application must be followed!On parquet flooring: Apply the material with an appropriate trowel; after a short exposure time, work in evenly using the single-disc sander and white non-abrasive pad until the surface appears dry.This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 30 g/m². |
| Special notes | Complete drying and the mechanical and chemical resistance of the surface will be increased by hardening at 100 : 4 with OR 5180 or OR 5188. Pot life of the mixture: 1 hour at 20 °C room-temperature. The hardener contains isocyanate. Please observe safety instructions; see the safety data sheet. The material dries with oxidation – please observe the general application instructions. For coating the insides of cupboards, we recommend Proterra Resit GE 17102 because of its low intrinsic smell. After suitable drying, can be re-coated with, for example, GZ 1023, GZ 1020 or GE 100.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”The coloured oil can be hardened 25 : 1 with OIL-HARDENER HIGH-SOLID OR 5188 before processing to provide additional protection against pigment abrasion. Or the coloured oil surface can alternatively be finish treated with a clear oil. Our NATURAL-SOLID-OIL GE 11254 can generally be used for this purpose. In the case of lighter colour tones, it is advisable to use PROTECT-OIL OE 52842 due to its light intrinsic colour and its excellent light fastness for an oil. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
COLOR-SOLID-OIL GB 1125x(gloss level)-(colour tone)Your request for the series
COLOR-SOLID-OIL GB 1125x(gloss level)-(colour tone)
