COOL-COLOR HB 6528x(gloss level)-(colour tone)
Hesse COOL-COLOR HB 65285-(colour tone) is characterised by its elegant surface formation that results in good scratch resistance and durability. This light fast, acrylate-based 1C colour lacquer also features high opacity. The product is suitable for base and top coating with a wide field of application. Given its low VOC content, this product is also suitable for "Green Building" projects. It is additionally classified as flame retardant under DIN EN 13501-1.
Artikel anfragen- VOC content < 3 %, thus also suitable for “Green Building” items
- Good coverage
- Use as a glass coating (3 % HDR 5002)
- Fire behaviour classified under DIN EN 13501-1 and IMO
Processing
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Airless
Areas of application
For all interior designs in residential settings on suitable woods, pigment fillers, primers and priming foils after corresponding sanding. For furniture surfaces throughout all interiors; for stairs, doors, ledges, etc. Also suitable for coating decorative glass surfaces after adding HYDRO cross-linker.
Page content
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Appearance | opaque |
|---|---|
| Decopaint base | wb |
| Decopaint category | I |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 300 g/m² |
Processing Instructions
| Stackable according to | 16 h / 20 °C |
|---|---|
| Surface sanding (grain size) | 120 - 400 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 10 m²/l |
| Processing information | When directly coating cleaned or sanded foils, please apply a test coat to check the bonding! When being used on coarse-pored woods, the addition of up to 5 % of HYDRO Optimizer HZ 70 improves pore wetting and pore appearance. Can be coated over: after 3 - 4 hours at 20 °C room temperature and with adequate air circulation with another coat of the same or with a matching clear product. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904.The addition of 3 % HYDRO Cross-linker HDR 5002 to the lacquer can be used to coat glass surfaces for decorative purposes in interior design. Please clean the glass surfaces carefully prior to coating. When coating behind glass the colour of the glass will influence the final colour tone. Please conduct a trial coating!This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 120 g/m². |
| Special notes | Complete final drying and stackability are dependent on the colour tone selected, as well as the quantity applied and the drying and environmental parameters. For stacking or packing, a suitable intermediate layer (e. g. soft paper tissue or cotton cloth) prevents sticking and subsequent damage to the lacquered surfaces. Woods rich in active substances, such as ash, which tend to discolour when coated with pastel-coloured HYDRO colour systems should always be coated with 2C primers. For example, Hesse PERFECT-COLOR HDB 5434x(gloss level)-(colour tone) would be suitable. Pre-priming is possible depending on the required finish and substrate, for instance using COOL-PROTECT HI 6600-9343, COOL-FILL HP 6645-9343, 2C HYDRO Pigment filler HDP 5650-9343 and FANTASTIC-FILL DP 4755-9343. Exotic woods such as Macassar or extremely resinous knotty pine can be pre-primed using either PU Isolating primer DG 4720-0001 or COOL-PROTECT HI 6600-9343. When used on woods which are particularly content-rich (such as poplar, Hevea brasiliensis, particular knotty pines, exotic woods, etc.), the number of isolating layers and the quality of the coating should be determined in advance on the original substrate. Should absolute ring and colour abrasion resistance or a different gloss level be required, we recommend finishing with a product such as COOL-TOP HE 6509x(gloss level), HYDRO-PU PRIMO HDE 5400x(gloss level) or Hesse 2C HYDRO-PU Brillant lacquer HDE 54799. Please note that there may be changes in the colour tone when top coating on colour lacquer surfaces. Please conduct a test coat! The bond on sanded laminate surfaces should be checked on the basis of a sample coating under practical conditions, because the quality of the laminate has a significant influence on the bond of the subsequent lacquer system! When used on staircases (treads) we recommend finishing the colour lacquer surface with Hesse COOL-TOP HE 6509x(gloss level) or other HYDRO staircase lacquers.We recommend our Glass lacquer range HDB 57485-(colour tone) for coating glass surfaces that come into contact with water or that are exposed to heavier use.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
COOL-COLOR HB 6528x(gloss level)-(colour tone)Your request for the series
COOL-COLOR HB 6528x(gloss level)-(colour tone)
