FANTASTIC-COLOR DB 4888x(gloss level)-(colour)
FANTASTIC-COLOUR is a light fast and very well-balanced, scratch resistant two-component colour lacquer with impressive opacity and fast drying. The acrylate-based product’s particular distinguishing features are its outstanding adhesion on vertical surfaces together withexcellent levelling on horizontal surfaces. FANTASTIC-COLOUR is suitable for top coating and is therefore the right colour lacquer for very sophisticated and high-quality colour lacquer finishes with an impressive feel and metal marking resistance. FANTASTIC-COLOR can also be applied directly onto sanded, bare MDF edges and surfaces.
Artikel anfragen- Up to 60 % more material can be applied on vertical surfaces in comparison with standard PU colour lacquers
- 40 % higher opacity across all colour tones and up to 25 % higher solids content in comparison with UNA-COLOR
- can be directly applied onto MDF edges
- good metal-marking resistance; a transparent top coat can be omitted in many cases
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
Areas of application
FANTASTIC-COLOR meets the highest colour lacquer demands in every relevant product feature and can be used for all interior fittings, including kitchens and bathrooms and for coating the interior fixtures aboard vessels.
Page content
Technical information
Certificates
Technical Specifications
| Appearance | opaque |
|---|---|
| Number of layers (max) | 4 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 180 g/m² |
| Total quantity applied | 600 g/m² |
| Mixing ratio (volumetric) | 10 : 1 |
| Mixing ratio (gravimetric) | 100 : 9 |
Processing Instructions
| Potlife | 6 h / 20 °C |
|---|---|
| Drying | 2 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 320 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | 6 m²/l |
| Processing information | Hardening at 5 : 1 with PU Hardener DR 4076-0001 after previously mixing in 5 % Glass lacquer additive EL 460-0025 with the lacquer components also enables direct coating on glass after it has been properly cleaned. We recommend using Cleaning thinner ZD 101 to clean glass surfaces prior to application. FANTASTIC-COLOR can also be applied at a mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070. Direct application on untreated MDF should only be performed at a mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071!The thixotropic properties of FANTASTIC-COLOR mean that it tends to require a higher addition of thinner in comparison to other lacquer systems. The following additive quantities (in relation to the lacquer/hardener mixture) have proven to be effective in practice.Coating of small parts (normal temperature around 20 °C +/- 2 °C): addition of circa 20 - 30 % Thinner DV 4900Coating of small parts (high temperatures > 25 °C): addition of circa 20 - 30 % Thinner DV 4935Coating of large components (temperatures around 20 °C +/- 2 °C): addition of circa 30 % Thinner DV 4935Coating of very large components (temperatures > 25 °C): addition of up to 50 % Thinner DV 4935 is possible. |
| Special notes | Cleaning concentrate GR 1901 can be used in a ratio of 20 parts water and 1 part cleaning concentrate to remove fingerprints and grease spots (caused for instance during assembly work) without leaving streaks.Use a dampened gauze or cotton cloth to apply the water/cleaner solution and clean the surface. Then use a dry gauze or cotton cloth with light pressure to rub it uniformly dry.This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 100 g/m².“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
FANTASTIC-COLOR DB 4888x(gloss level)-(colour)Your request for the series
FANTASTIC-COLOR DB 4888x(gloss level)-(colour)
