PU DECORATIVE METAL Base DE 48219-0901
The two-component, light fast base coat PU DECORATIVE METAL DE 48219-0901 is clear and can be mixed with selected Hesse metal powders depending on the desired surface and effect. Furthermore, the different metal powders can be combined in a lacquer/hardener mixture. This allows a large and individualized degree of design freedom when planning and designing this particular surface. PU DECORATIVE-METAL is also IMO-certified.
Artikel anfragen- Application of real metal by spraying, thus allowing direct application on many substrates. 5 different metal types are available and can be mixed and combined together; IMO-certified
Processing
Compressed air spraying
Rolling
Spreading
Areas of application
For all interior fittings, for yachts and for coating furniture.
Page content
Technical information
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| VOC EU % | 56,8 % |
| Mixing ratio (volumetric) | 4 : 1 |
| Mixing ratio (gravimetric) | 100 : 26 |
Processing Instructions
| Potlife | 1,5 h / 20 °C |
|---|---|
| Drying | 24 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 24 h / 20 °C |
| Surface sanding (grain size) | 220 - 280 |
| Intermediate sanding (grain size) | |
| Yield per pass | m²/l |
| Processing information | First mix the base lacquer with hardener and then add the metal powder by weight in a ratio of 80 parts of metal powder to 20 parts lacquer/hardener mixture and stir it in carefully without lumps. Apply the mixture in several layers with brief initial drying to reach a total of 800 - 1200 g/m². Subsequent additional manual application enables the creation of individual decors to suit requirements (intermediate drying 30 - 60 min / 20 °C). The maximum wet application amount when used as a low-flammable coating for seagoing vessels is 1000 g/m². Substrate treatment: pre-sand the basecoat or deviating substrate materials using 220 - 280 grit. In the case of direct coatings or on cleaned or sanded foils, please apply a test coating to check the adhesion!For more detailed product information and methods for using PU DECORATIVE-METAL, please use the link https://www.hesse-lignal.de/service/effekte/pu-decorative-metal.html to visit the new landing page on our website |
| Special notes | This product may only be combined with other approved and technically suitable products when it is being used as a flame-retardant coating material for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The choice of workpieces, preparation of the substrate, mixture and processing of the individual components and subsequent treatment of the coated surfaces require special knowledge. Your local sales representative will be happy to advise you. Pre-priming is possible depending on the required finish and carrier material, e.g. using DP 4755-9343 and DP 4791-9343 / DP 491-9343. Metals and metallic surfaces are subject to natural oxidation which may result in a change of colour. For cleaning and care we recommend the products indicated in our presentation. Other polishing and care products may cause changes in colour tone and effect. Coating after > 2 d with PU Cellulose lacquer will prevent oxidation and finger marks. Remove metal abrasion, waxes and polishing residues using special cleaner! “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU DECORATIVE METAL Base DE 48219-0901Your request for the series
PU DECORATIVE METAL Base DE 48219-0901
